Meeting with Wilocity today has been very interesting.  Wilocity will be the first company to market with WiGig technology - a 60 GHz band wireless system.  Designed as a direct southbridge connection, the system uses PCIe lanes to provide necessary wireless bandwith, and I am told costs around the same ballpark as a normal WiFi 802.11n mini-PCIe wireless solution.  With it being compatible with mini-PCIe, Wilocity's Wil6100 chipset is capable of 4.5 Gbps peak wireless throughput (2.5 Gbps bidirectional).

On display were a variety of WiGig usage scenarios.  Wilocity will be advertising a connectivity box (or 'docking zone') to ODMs which essentially transmits that PCIe functionality into a set of new connectors.  This means that the laptop/WiGig connects to the box wirelessly, and the box adds functionality to the mobile device.  On the boxes on show we had access to USB 3.0, HDMI, additional ethernet, DisplayPort - basically anything that can be branched off a normal PC chipset.

One scenario shows the WiGig technology used to drive two additional displays over the air.  The signal goes to the connectivity box, to which both monitors are connected.  The monitors were used to show 1080p video across multiple screens - the laptop screen which is consumed locally, and then one of the screens connected wirelessly, to show no lag between the two.

Another usage scenario was bidirectional capability.  Here we have a 720p camera going from the Docking Zone box to the laptop, and a 1080p video going from the laptop to the Docking Zone box and then on to the monitor.

Finally, it's worth noting wireless storage.  With the first generation of these devices using PCIe 1.1 for 2.5 Gbps in one direction, we finally have a valid usage scenario for wireless backup storage - either personal hard drives or home backup systems.  Imagine going on business and having a hard drive in your back that connects wirelessly to your laptop at a faster rate than the hard drive in the laptop.  Wilocity showed us an example device for this:

Wilocity are currently talking to distributors (think anyone who might use a WiFi add-in card - laptop manufacturers et al.) while their technology is in development.  Judging by what I have seen, I could easily find functionality for WiGig in my home.  In terms of range, Wilocity tell me that fundamentally WiGig isn't too fond of walls - so while home spaces should be ok, office spaces may have to be segregated/daisy chained as required.

Comments Locked


View All Comments

  • SoulShadow - Tuesday, June 5, 2012 - link

    There must be some major compression going on to display 1080p wirelessly over 2.5Gbps bandwidth
  • xdrol - Tuesday, June 5, 2012 - link

    FYI, 1920 x 1080 x 32bit x 30 FPS uncompressed is just 1.99 Gbps.
  • TheCommish - Tuesday, June 5, 2012 - link

    so uncompressed 1080p (60fps) would be ~4Gbps > 2.5
  • ShieTar - Tuesday, June 5, 2012 - link

    Mmh, but do I understand correctly that an GPU is actually inside the remote box, that is connected to the laptop CPU via this form of wireless PCIe? In that case you would not have to transport uncompressed formats, but rather send the video data to be decoded by the GPU. And Blueray data rates are nowhere near 2.5 Gbps.
  • xdrol - Tuesday, June 5, 2012 - link

    And how is compressing video to 62.5% "major"? (Hint: it is not, lossless compressions can do more.)
  • DanNeely - Tuesday, June 5, 2012 - link

    You should be looking at 24bit color not 32bit (the last 8 bits aren't needed for output); so your raw bandwidth is only ~3Gbits. 20% is within reason for lossless compression.
  • ShieTar - Tuesday, June 5, 2012 - link

    "WiGig isn't too fond of walls"

    60 GHz in general isn't too fond of anything containing water either. So make sure that your roommates don't step into between you and your router while trying to use it.

    Even in normal air, 60 GHz range is about 10 m. Results may differ depending on where you live and how your AC works.

    I think this may be rather practical for short ranges, let's say wireless docking stations and screens, but I would not really expect it to make a reasonable wireless network for a whole house/apartment.
  • EnzoFX - Tuesday, June 5, 2012 - link

    Hmm, then those things might as well be stationary. If it's stationary, I like to run a cable for it.
  • DanNeely - Tuesday, June 5, 2012 - link

    A plugless docking station would make docking much easier for people who don't want to spend the extra for a business class laptop; or who need gaming grade gfx support on the go.
  • MGSsancho - Tuesday, June 5, 2012 - link

    point-to-point between buildings is where this chip will make millions. even if the range with dishes is a few miles with big dishes this would be a no brainer compared to running fiber across a city.

Log in

Don't have an account? Sign up now