Nixeus VUE 30: 30" 2560x1600 IPS Monitor Reviewby Chris Heinonen on August 20, 2013 6:00 AM EST
Over the past 18 months, we’ve all been happy to watch as the price of 27” 1440p monitors has steadily fallen. With cheaper import panels becoming available, the cost of moving up to a high resolution panel has fallen considerably. I reviewed the Nixeus VUE 27 last year as it was the cheapest way at the time to get a 1440p panel while still getting a US warranty. Now Nixeus is back with a 30” monitor, the Nixeus VUE 30. With the 16:10 aspect ratio that commenters continually ask for and an IPS panel, will this mark the shift of a downward trend for 30” monitor prices as well?
The design of the VUE 30 is similar to the VUE 27 that I previously reviewed. The controls for the display remain in the lower-right and it has the same OSD interface of its predecessor. Since the OSD was one of my faults with the VUE 27 I was hoping to see this improve but it did not. A welcome change, which I also saw on the ASUS PQ321Q, is locating the inputs on the left side of the display and not the bottom. This makes them far more accessible for quickly hooking up a device like a laptop. As the VUE 30 is so large due to the screen size, it has plenty of space to connect cables without them sticking out the sides of the display.
The connections options consist of DisplayPort, DSub, DVI, and HDMI, along with an audio output for headphones. The HDMI port is listed as 1.4a but it does not support 2560x1600 resolutions; if you want the full 2560x1600 resolution you will need to use a DVI-DL or DisplayPort connection. The back of the display is very solid and metal, but the front is a glossy plastic bezel that I would prefer be matte.
As with the VUE 27 the stand for the monitor screws together with some small screws and not with captive screws or a tool-free mechanism. Compared to the VUE 27 the packaging has greatly improved. Parts are well laid out in the package, and there are no cheap boxes or labels that look like it was transferred straight from a foreign assembly line. The initial feeling of opening the VUE 27 was one of my complaints, as it felt cheap and rushed. Nixeus has learned from that and the packing and presentation of the VUE 30 is much improved.
The stand is also improved from the VUE 27 model. It allows for an easier swivel but lacks any height adjustment and is not as solid as a Dell or ASUS stand would be. The VESA mounting holes are a less common 200mm x 100mm pattern, so aftermarket stands might require an additional adapter to be used. The external power brick and its custom connector have been replaced with a standard IEC port, reducing desk clutter.
One key difference with the VUE 30 from other affordable displays is the use of a wide gamut CCFL backlight. This allows for a gamut that goes well beyond the AdobeRGB gamut, as the testing will show later, and is not common to find except in displays aimed at graphics professionals. The displays that target graphics professionals also tend to have sRGB modes to reign in that gamut but the Nixeus does not. We will see in our testing the behavior that this causes.
|Video Inputs||DisplayPort 1.2, DVI-D DL, HDMI 1.4a, Dsub|
|Response Time||7ms GTG|
|Viewing Angle (H/V)||178/178|
|Power Consumption (operation)||130W minimum|
|Power Consumption (standby)||None Specified|
|VESA Wall Mounting||Yes, 100mm x 200mm|
|Dimensions w/ Base (WxHxD)||27.5" x 22" x 3"|
|Additional Features||3.5mm Output, stereo speakers|
|Limited Warranty||1 Year|
|Accessories||DVI-DL Cable, Power Cable|
With an IPS panel, the viewing angles on the VUE 30 are what you expect. Unless you try to sit perpendicular to the display you should be just fine. There is a bit of contrast wash-out at the extreme angles, but nothing you will see in daily use.
Post Your CommentPlease log in or sign up to comment.
View All Comments
mrbobmcbob - Tuesday, August 20, 2013 - linkCan you comment on this display working with a MBP/Air and DisplayPort? I know that there has been issues with other panels in the past (and not just with adapters to Active DVI). Thanks!
tokyovigilante - Tuesday, August 20, 2013 - linkThese seem fixed as of 10.8.4/10.[REDACTED]. My Dell U2713HM is correctly using RGB mode out of the box with a minDP 1.2->DP 1.2 cable with my 2011 11" Air.
GonzaloMin - Wednesday, August 21, 2013 - linkLove my job, since I've been bringing in $82h… I sit at home, music playing while I work in front of my new iMac that I got now that I'm making it online. (Home more information)
jigglywiggly - Tuesday, August 20, 2013 - linklol 30ms of input lag, how is that even useable?
Sancus - Tuesday, August 20, 2013 - linkit's the same as every other 30 inch IPS monitor out there, and most if not all 27s as well. As you can plainly see in the graph. People buying these monitors care about image quality and color accuracy, they don't care about shooter motion clarity.
ZeDestructor - Tuesday, August 20, 2013 - link> they don't care about shooter motion clarity.
YES WE DO!
blackoctagon - Tuesday, August 20, 2013 - linkThen you shouldn't be buying "these" monitors to begin with!!!
Samus - Tuesday, August 20, 2013 - linkI have no issues playing BF3 on my HP ZR2740w IPS
1Angelreloaded - Thursday, August 22, 2013 - linkI was going to say I have had no issues with the 30' Dell IPS 2560x1600.
blackoctagon - Thursday, August 22, 2013 - linkThe fact that you're 'not experiencing issues' doesn't mean that you're experiencing ideal motion clarity. You're not obliged to seek out monitors that have the best motion clarity for shooters, but if that's the road you choose to go down please think twice before claiming that you 'care' about motion clarity