Wrapping up our IFA coverage, at least week's trade show TPV demonstrated a preproduction version of its upcoming ultra-wide (32:9 aspect ratio) 49” Philips display. The 492P8 monitor will have something in common with Samsung’s C49HG90 introduced earlier this year, but it will lack quantum dots and a number of other features. A good news is that it will cost less, at a little over $1000.

Over the past few quarters companies like Philips, LG, Samsung, JapanNext and some other have introduced computer displays with diagonals significantly exceeding 30” – 34”, setting a new trend for ultra large monitors. Separately, ASUS, Dell, Samsung, LG and other have launched LCDs with a 21:9 aspect ratio, setting another trend, this time for ultra-wide monitors. Different suppliers of monitors target their ultra-large LCDs at different audiences, but it is clear that these wide and/or huge displays are not niche products, but represent new market trends. Being one of the largest maker of LCD panels in the world, Samsung recognized both trends early enough and this year introduced the world’s first mass-market monitor with a 49” diagonal and an ultra-wide 32:9 aspect ratio.

Samsung gave the backlighting on its C49HG90 a quantum dot treatment to expand its color space to 95% of the DCI-P3, while also equipping it with AMD’s FreeSync 2 technology and increasing its maximum refresh rate to 144 Hz in order to address the high end of the gaming market. At present, the display is indeed one of the most advanced and expensive ($1499) gaming monitors in the industry. Meanwhile, gamers are not the only category of users, who can benefit from a massive ultra-wide screen. There are users of multi-monitor configurations in finance, engineering, design, audio/video production and other industries, who would gladly swap two displays for one ultra-wide one or four LCDs for two. Apparently, Philips plans to address these industries with its upcoming 492P8 monitor. The company confirms that Samsung is the supplier of its 49" 32:9 panel, but given the fact that this is a rather niche product (there are not a lot of people who have enough space for a 49" monitor on their desks at home or in office), it is highly likely that Samsung will remain the only producer of such panels for a while.

As the name implies, the Philips 492P8 belongs to the brand’s P-line offerings aimed at professionals. Although Philips has demonstrated the 492P8 in action at IFA, the company is not releasing the monitor's complete specifications just yet, as some things may change between the current prototype and the final product. Nonetheless, the basic details about the display panel itself are already known: a 3840x1080 resolution, up to 600 nits brightness, up to 5000:1 contrast ratio, 178º/178º vertical/horizontal viewing angles, 1800R curvature and so on. Unlike Samsung, Philips will not be using QLED backlighting to improve color gamut, citing the different target audiences. For the same reason, peak brightness could be limited and since we do not have the final specs of the 492P8 at hand, we'd rather not speculate about the specifications of the monitor itself.

 

Connectivity capabilities of the Philips 492P8 look rather good: the monitor has a DisplayPort, an HDMI port, a USB Type-C input, a D-Sub connector, as well as a built-in dual-port USB 3.0 and an Ethernet hub (the USB-C acts like an upstream port for both). The presence of the D-Sub looks a bit odd, but it could be used to connect an additional computer and display its output in picture-by-picture (PBP) or picture-in-picture (PiP) mode. In addition, there are two 3.5-mm audio connectors for headphones and a microphone.

Philips Ultra-Wide 49" Display
  492P8
Panel 49" VA
Native Resolution 3840 × 1080
Maximum Refresh Rate unknown
Response Time unknown
Brightness up to 600 cd/m² (?)
Contrast up to 5000:1 (?)
Backlighting LED
Viewing Angles 178°/178° horizontal/vertical
Curvature 1800R
Aspect Ratio 32:9 (3.56:1)
Color Gamut sRGB
Dynamic Refresh Rate Tech unknown
Pixel Pitch 0.312 mm²
Pixel Density 81.41 PPI
Inputs 1 × DP
1 × D-Sub
2 × HDMI
Audio 3.5 mm input and output
USB Hub 2 × USB 3.0 Type-A connectors
Ethernet 1 GbE port
MSRP €899/$1077 (preliminary)

Philips plans to bring the 492P8 to the market sometimes in Q2 next year and intends to sell the unit for about €899 ($1077). Keeping in mind that we are at least a half of a year away from the launch of the 492P8, some specs and/or MSRP may change due to various circumstances.

Related Reading:

Source: Philips

Comments Locked

27 Comments

View All Comments

  • 8steve8 - Friday, September 8, 2017 - link

    1080 vertical pixels? meh.
  • ddriver - Friday, September 8, 2017 - link

    Unfortunately once again targeting gamers. Aiming lower overall pixel count so graphics cards can keep up.

    Boost the vertical resolution to 1600, maintain the aspect ratio AND physical size (increase density), and it would make a great product.
  • Senpuu - Monday, September 11, 2017 - link

    This product is definitely not targeted at gamers... it's going to find buyers in the commercial / industrial process control market segment where it's common to graft together 6-12 monitors for a single operator station. I'm sure there are other demographics (like those specifically mentioned in the article I'm almost certain you didn't actually read...) that will utilize this well too, but the specs and marketing make it very clear gaming is not one of them.
  • ddriver - Monday, September 11, 2017 - link

    Nonsense, color accuracy and freesync are wasted on "industrial process control". It could do the job, but it was definitely not designed for that, and definitely will not be marketed this way.
  • asomiv - Wednesday, September 13, 2017 - link

    People with a wall of monitors on their desk are going to need much higher pixel density.

    They're already filling their entire visual field with monitors so they can see everything. These monitors are going to either render widgets too large consuming precious visual field, or the widgets will be the size they're accustomed to and not crisp / blurry.
  • stangflyer - Friday, September 8, 2017 - link

    Exactly- 1440 minimum
  • HideOut - Saturday, September 9, 2017 - link

    I love my dell 1440 34" ultrawide, but one could always go bigger :>D
  • PixyMisa - Saturday, September 9, 2017 - link

    This is why we need 8K TVs - so they can slice one in half and give us a 7680 x 2160 monitor.
  • Notmyusualid - Monday, September 18, 2017 - link

    That is where I stopped reading also...
  • Tunnah - Friday, September 8, 2017 - link

    But 2 of these on top of each other just makes a 55" screen. Why not just buy a single 55" 4K TV ? You'll get a higher resolution, no messing around with multiple monitors, and no black bar in the middle

Log in

Don't have an account? Sign up now