Intel Storage Platforms for the NAS Market

The higher end segment of the SOHO / SMB NAS market uses Intel's Core-series and Xeon CPUs to deliver the required performance while supporting a large number of drive bays (typically more than 8, in a rackmount form-factor). Those are not the subject of discussion in this article. Over the last four years or so, Intel's play in the other tiers has been mainly with its Atom CPU lineup. A little bit of history gives us some perspective.

History

In 2010, Intel launched the first Atom-based storage platform (codenamed 'Bandon'), combining a D410 or D510 processor with the 82801R I/O controller (belonging to the ICH9 family). It was capable of supporting up to 6 drive bays, and we even reviewed LaCie's offering (5big Storage Server) using this platform. The Atom D410 / D510 were both based on the Bonnell microarchitecture (coming under the Pineview codename). Later in the year, Intel also pushed out updated Atom CPUs (D425 / D525) with slightly higher base frequencies for use with the storage platform. The QNAP TS-659 Pro II was one of the Atom D525-sporting NAS units that we reviewed.

Pineview (45 nm) was followed by Cedarview (32 nm) in late 2011. It was still based on the Bonnell microarchitecture, but offered higher clock speeds and better performance per watt. Almost a year later, the official storage platform (codenamed 'Milstead') announcement with the Atom D2550 (followed by the D2700) and the 82801JB I/O controller (belonging to the ICH10 family) was made. The focus was on the improved graphics capabilities and HDMI output, which enabled interesting new use-cases related to media playback and surveillance video. LaCie's 5big NAS Pro and the Synology DS1812+ were some of the NAS units that we reviewed in this family.

Between the rollout of products based on the Bandon and Milstead platforms, the NAS market for home consumers and power users started experiencing rapid growth. This market demanded a different set of features compared to SMB requirements. NAS vendors had to provide extensive multimedia support (not in terms of playback on a display, but the ability to manage and stream content). Being a cost-sensitive market, vendors were loath to use a two-chip solution (main CPU + I/O controller hub). Towards serving this market, Intel decided to re-purpose their Berryville CE processor (a 32nm SoC with two Bonnell-based Atom cores as the host CPU) which originally targeted the STBs. For storage solutions, these CE 53xx chips were relaunched in their Evansport avatar and pitched as a media server platform. The CE 53xx SoCs also happened to have a H.264 encoder in addition to a multi-format decoder (giving it the capability to act as a transcoder). We have been pretty bullish on Evansport, having reviewed devices from all of Intel's announced partners (Asustor, Synology and Thecus).

Silvermont into the Picture

In moving from 32nm to 22nm, Intel completely revamped the microarchitecture for their Atom cores. Bonnell was replaced by Silvermont, bringing out of order execution and other improvements into the picture. With so many code names associated with Silvermont-based products, we thought it would be best to present a bulleted list indicating the markets which Intel hopes to address with each of them.

  • Bay Trail
    • Bay Trail-T: Atom Z36xx and Z37xx series for tablets
    • Bay Trail-M: Pentium and Celeron branding (N-series) for notebooks and AIOs
    • Bay Trail-D: Penitum and Celeron branding (J-series) for desktops
    • Bay Trail-I: Atom E38xx for the embedded market
  • Merrifield
    • Atom Z34xx: Low-end to mid-range smartphones
  • Moorefield
    • Atom Z35xx: Premium smartphones
  • Avoton
    • Atom C2xx0: Microservers and cloud storage
  • Rangeley
    • Atom C2xx8: Network and communication infrastructure

From our analysis of the various products, we believe the highlighted ones make sense for the NAS market. While the suitability of the Avoton and Rangeley for the NAS market is without question (they have a large number of SATA ports and PCIe lanes integrated into the SoC), the Bay Trail-D parts are quite interesting.

The various possible components in a Bay Trail SoC are given in the diagram below.

Depending on the target market (as specified in the bulleted list above), some of the components in the above block diagram are cut out. For example, Bay Trail-T does away with the SATA and PCIe lanes. Bay Trail-D is more interesting to us in this article, as the QNAP TS-x51's Celeron J1800 belongs to that family.

Introduction QNAP Goes Bay Trail
Comments Locked

49 Comments

View All Comments

  • ganeshts - Monday, June 23, 2014 - link

    To Intel's defense, they never claimed it would be part of Bay Trail, actually.

    But, I do agree that they could have created new part numbers instead of just stepping changes. I have asked Intel for comment, and will update the piece when they respond.
  • beginner99 - Monday, June 23, 2014 - link

    After seeing the pricing a DIY looks like a very sweet deal again...
  • ryanmt - Monday, June 23, 2014 - link

    Yeah... for me, the value prospect of a DIY is in the next-gen file systems with the atomic-COW, bit-level versioning, etc. Until the vendors get on that bandwagon, I don't think they'll get my business.
  • rocktober13 - Monday, June 23, 2014 - link

    Maybe I missed it, but will Plex use QuickSync if installed on the QNAP? Or does QS only work with QNAP's apps?
  • ganeshts - Monday, June 23, 2014 - link

    QS will work only with QNAP's apps. (Qfile and built-in media server)
  • rocktober13 - Monday, June 23, 2014 - link

    Thanks, I think the adoption of QS is great, but I still think the one or two apps I might use aren't worth the price premium over a DIY NAS.
  • Netscorer - Monday, August 11, 2014 - link

    Thanks. This & the price makes it a no-go for me. Yet another 'Multimedia' NAS where 1+1 does not equal 2, as they have video transcoding and Plex server but not the two together.
    For now it's still cheaper to buy no-thrills 4-bay NAS fronted by Haswell-based HTPC. You get full Windows on TV, better performance, full-featured (and fully-supported) Plex plus better upgrade flexibility.
  • snakyjake - Monday, June 23, 2014 - link

    I have five main concerns before I'll consider a NAS:
    1) If a small file is accessed, do all drives spin up?
    2) Data integrity. There's a difference between drive failure and bad data blocks found from a drive surface scan.
    3) Is my data stored in a propriety format?
    4) Upgradability. I can't afford to keep purchasing a new complete system. And what about new vendor software?
    5) Cost.

    OpenMediaVault, FreeNAS, UnRaid, FlexRaid, are very easy. Windows Home Server used to be a viable option too.

    I'm just not willing to let my data become hostage to a proprietary vendor, without assurances.
  • ganeshts - Monday, June 23, 2014 - link

    All the popular NAS vendors who offer off-the-shelf NAS boxes use software RAID (except for Drobo, whom we have never covered on this site in a review as yet). This means you can take out all the drives, image them and mount on a PC. After that, you could just use something like UFS Explorer to recover the data.

    For 'bad blocks', I have usually seen vendors reallocate without proclaiming drive failure. They do sound a warning in the logs, though (Again, haven't tested for all vendors)

    I have never seen these NAS vendors charge for OS upgrade (that said, sometimes the OS is quite 'demanding' and 4 - 5 year old models are not capable of running the upgraded version).

    (1) and cost vary from vendor to vendor, I guess.
  • mannyvel - Monday, June 30, 2014 - link

    < This means you can take out all the drives, image them and mount on a PC>

    Has anyone actually attempted to do this and get it to work?

Log in

Don't have an account? Sign up now