ASUS Zephyrus G14: Battery, Display, and Storage

Battery Life

One of the key elements in the AMD Ryzen Mobile 4000 story is that we should finally have a product that offers a decent amount of battery life. AMD’s previous notebooks, even those with Zen mobile processors inside from last year, have been behind Intel equivalent designs by a margin that the market has been uncomfortable with. Every user gets some degree of battery anxiety, myself included. AMD believes that the new Ryzen Mobile 4000 story fixes this quite substantially.

I should note that up until today, I have used almost exclusively Intel laptops, mainly because they have been the ones that fit my needs. Performance and portability have always been key, plus the thin and light ultraportable designs have offered great battery life and fast charging, especially when flying around the world. The only time I don’t get battery anxiety is with an Arm based laptop, which I can charge and still have battery two to three days later depending on use, but then I’m trading performance and usability to get that. Whatever AMD and its partners had offered up to this point would not fit the bill without compromises, so naturally most users have been skeptical when AMD has started to say that it can match Intel’s battery life performance now.

The best way to find out is by doing some battery tests. Our comparison points here are:

ASUS Zephyrus G14 vs Razer Blade 15
ASUS
Zephyrus G14
AnandTech Razer Blade
15-inch
Ryzen 9 4900 HS CPU Core i7-9750H
RTX 2060 (Max-Q) GPU RTX 2060
16 GB DDR4-3200 DRAM 16 GB DDR4-2666
1 TB Intel 660p Storage 512 GB Liteon CA3
1080p @ 120 Hz Resolution 1080p @ 144 Hz
Wi-Fi 6 Wi-Fi Wi-Fi 5
76 Wh Battery Size 80 Wh

For our battery tests, we set both panels to 200 nits, place the systems in battery saver mode, and make sure all updates are applied to both. For our offline video test, Wi-Fi is disabled.

First up is our video test. For this, we run a H.264 encoded version of a popular 2h30 film on repeat in the native Films & TV application in Windows 10. This film is fairly dimly lit in general, which can sometimes have a beneficial effect on battery life.

Video Playback Battery Life - 200 nits

Well that’s pretty succinct. Our Razer Blade manages 6 hours and 39 minutes, while the ASUS Zephyrus G14 does 12 hours and 33 minutes. That’s not quite double, but that’s a step function above and beyond what I expected. Dang.

For our web test, we run a script that loads fixed variants of popular websites featuring a wide variety of capabilities. This is web loading rather than browsers processing and computing data, and into the mix we make the mouse scroll up and down as well.

The Razer Blade achieved 5h44, which is around what we expected given the video test. The G14, on our first run, only got 4h39, which was a lot lower than expected. We performed the test multiple times, with roughly the same results. We pinged AMD to find out if they had experienced like it, and they could not reproduce it – their own data suggests around a 9 hour design.

It took a few days to figure it out, but I think I found the answer.

Web Browsing Battery Life - 200 nits

Both of our laptops have variable refresh rate displays that go above 60 Hz. These high refresh rate displays are meant to kick in when going beyond 60 Hz will make a material difference to the experience, such as gaming. When watching a film, it doesn’t make a difference, so it should be sat at 60 Hz. When word processing or reading email, again these do not need >60 Hz, so the feature should be off.

However, web browsing is a little bit different, and this is where users are going to see a difference in battery tests for this device. If a web browsing battery test simply loads websites and sits there looking at what pops up, then sure, the screen can stay at 60 Hz. But the moment you start scrolling, going beyond 60 Hz actually makes a difference to the experience – if the system can go beyond 60 Hz, it should.

So theoretically, both of our systems should have been running their screens at the higher variable refresh rates, simply because our web tests initiates scrolling every time it loads a new page. There are some idle spots, so we are about 50% idle and 50% scrolling, which is a fair mix. Now, when a system is on wall power, you expect all the bells and whistles like peak turbo and variable refresh rate to be enabled, but when going off of power, it is up to the laptop vendor to decide which features you should keep.

With the Razer Blade, it was clear that the system was forced into a 60 Hz only mode, the discrete GPU gets shut down, and power is saved. However for the ASUS, that doesn’t seem to be the case. The system was still polling above 60 Hz, which was causing the discrete GPU inside to fire up. This meant that instead of having a system power around 4 W or so, we were getting a system power of 21 W, because that RTX 2060 Max Q was up and running.

Now, AMD did not find this issue because it looks like their ASUS G14 units internally were actually turning off the high refresh rate for their web tests. So perhaps my sample is a dud in that respect, or in my own meddling I had somehow disabled this particular feature (which to be honest, is well within the realms of possibility). In the end, I decided to manually put the system into power saver mode, and turn the display back to 60 Hz, and I reran the test. Nice and simple, and the data showed a 12hr23 battery life. Which is a very crazy high battery life for an AMD system.

On charging, when using the 180 W charger, the AMD system in 30 minutes went from 6% battery to 44%, in 60 minutes it went from 6% to 72%, and by 83 minutes it was at 90%. The last 10 percent almost took another hour.

Display

For the Zephyrus G14, there are three options for the display:

  • 1920x1080 IPS, 60 Hz, 100% sRGB
  • 1920x1080 IPS, 120 Hz, Adaptive Sync, 100% sRGB
  • 2560x1440 IPS, 60 Hz, Adaptive Sync, 100% sRGB

In our units, we were given devices with the middle display, offering 120 Hz. ASUS lists the displays as having a peak brightness of 300 nits, which is a little low, even with higher refresh rate displays and 100% sRGB calibration. In our testing, we only achieved 260 nits peak brightness (full screen white), with a 0.189 nits on a dark screen.

Nonetheless, it was clear that this display had been color calibrated. With our i1 Display Pro, the color accuracy was top notch.

As we ramp up the colors, the biggest deviations from the norm are the blues, but by a small fraction.

Doing a direct color analysis, and there’s some mild variation in the greens in the center of this image, and the stronger blues. The latter half of the third row is showing where the blues are the weakest, but despite that, the whole set looks very good.

Storage

ASUS is set to offer this unit at around the $1450 mark, and with that comes a 1 TB NVMe PCIe 3.0 x4 drive. This is double the size of the 512 GB NVMe PCIe 3.0 x4 drive that comes in the $1679 Razer Blade, which sounds like a bargain. However, the Razer does win on performance.

The ASUS Zephyrus G14 uses the Intel 660p drive, which is an 2280 M.2 drive with a Silicon Motion SM2263 drive with 256 MB of DRAM and Intel 64L QLC memory. Despite the PCIe 3.0 x4 specifications, in this system it only hits ~1900 MB/s peak sequential reads and ~1800 MB/s peak sequential writes.

The Razer Blade uses a 512 GB PCIe 3.0 x4 NVMe drive from LiteOn, specifically the CA3. This uses a Marvell 88SS1093 controller with DRAM and is paired with Toshiba’s 3D TLC NAND. TLC should have a performance advantage over the QLC, and that is probably what we’re seeing here on the Razer. There’s a sizable jump in the sequential tests and the high queue depth random tests, however the low queue depth test is actually better on the Intel drive inside the ASUS.

ASUS Zephyrus G14: Inside and Out ASUS Zephyrus G14 (Ryzen 9) vs Razer Blade (Core i7): CPU
Comments Locked

267 Comments

View All Comments

  • Deicidium369 - Sunday, April 12, 2020 - link

    Nah you and I know it's not about hiding something - I have those Samsung TVs and they get the same round piece of black tape that all of my Webcams get unless they have a shutter.
  • shady28 - Saturday, April 11, 2020 - link

    ^^
    That. Outside of playtime, nobody uses webcams.
    That's that moment that you realize 90% of the people here haven't worked much more than burger flipping. Where I work and none of our vendors use them when doing presentations or meetings. It is all screen sharing, file and folder sharing, team or skype chat, etc. In fact, most developers I know actually put a piece of tape over their webcam, just in case.
  • Icehawk - Sunday, April 12, 2020 - link

    With our push to WFH due to C-19 everyone and their mother is asking us to enable their cameras but I agree, in actual meetings it’s maybe 10% at best that use it. Hell 1/3rd of the people don’t even login properly so you can see who they are.

    If you are going to include a camera at least integrate a shutter.
  • shady28 - Sunday, April 12, 2020 - link

    I don't even see 10%. I see near 0%, when someone turns on a web cam they instantly get messages saying 'Hey, you know your webcam is on?' - because it serves no purpose in most settings except to distract, annoy, disrupt, and lag.
    The only place I see it having value are people who want to 'face chat' 'facetime' etc type of scenarios with friends / family. Those are entirely social, and I would say 90% of people using the laptop for personal use don't care about that either (I don't, nor do many others I know). That's what the 2nd cam on your phone / tablet is for - that's where I see it being used, for family and friends.
  • erple2 - Sunday, April 26, 2020 - link

    Unless there's more than about 15 people in a telecon, we _usually_ always turn on the webcam. In a WFH situation where there's really only 1-3 other people that you see on a daily basis, I find it helpful to continue to "see" my coworkers. I'm older than most of my coworkers (work in software), and I prefer in-person talking than slack or text-based communication, and I find that webcams help keep me more engaged in the particular meeting. Note - most of what we do with a "telecon" includes screensharing, too, but I find it much easier to gauge reactions and the the other non-verbal communications if you can also see each other. So I would agree that a webcam is important.

    That having been said, I find basically all of the webcam that exist on laptops to be pretty crummy, and thus I use a separate webcam than the one that comes on my work computer (Macbook Pro). Though that doesn't stop my coworkers from using the terribad one that comes on their laptops.
  • Irata - Friday, April 10, 2020 - link

    Even on laptops that have one built in, I used a USB webcam. Much better quality and I know when I can be filmed and when not.

    The downside is that you are losing a USB port.
  • Qasar - Friday, April 10, 2020 - link

    which could be gained back, and a few more by getting a small usb hub like i did from kensington, 4 ports, 1" x3 " and a short 6 " cable, nice little portable usb 3 hub, and works just fine :-)
  • yeeeeman - Thursday, April 9, 2020 - link

    How is the fan noise situation?
  • 1_rick - Thursday, April 9, 2020 - link

    According to a review elsewhere noticeable but not obnoxious (no coil whine etc., just air whooshing). YMMV of course.
  • rrinker - Thursday, April 9, 2020 - link

    Impressive machine - but I have to laugh. OK, they get the (S)pecial 10 watt lower CPU - and then shove about 10 watts of LEDs on the cover....

Log in

Don't have an account? Sign up now