BenQ Launches EW277HDR: 27-Inch FHD Display with DCI-P3 & HDR10, Sub-$300by Anton Shilov on December 11, 2017 10:00 AM EST
For the past several quarters, we have seen numerous launches of 4K UHD monitors supporting the DCI-P3 color space as well as the HDR10 standard. To that end, BenQ has introduced its new 27” display that features an FHD resolution, a wide color gamut, and HDR10 support. While the display is more expensive than mainstream 27” monitors, it is going to be among the more affordable LCDs with DCI-P3 and HDR10.
The BenQ EW277HDR is based on a 27” VA panel and its general characteristics are modest at best — 1920×1080 resolution, 300 nits typical brightness (400 nits peak brightness in HDR mode), 3000:1 static contrast ratio, 4 ms GtG response time, and 178° viewing angles. Meanwhile the key selling points of the new display are formal support for HDR10 as well as a 93% coverage of the DCI-P3 color space.
Without any doubts, the inclusion of both HDR10 and DCI-P3 looks good on paper. However, for an LCD 400 nits max brightness is considered to be too low for HDR, which is due to the inheriently high black levels of an LCD leading to a lack of sufficient dynamic range. Meanwhile the 93% DCI-P3 coverage figure is a bit more complex than it first appears, as the panel is listed to support 16.7 million (8-bit) colors rather than 1.07 billion (10-bit) as is typical for other DCI-P3 displays. So while the monitor is specified to be able to cover most of the P3 range, an 8-bit panel is going to limit its precision. That said, all of this is going by the specifications; the actual HDR/wide color gamut user experience is something that remains to be seen on the EW277HDR.
Meanwhile, to enhance everyday visual experience, the monitor has a special button that switches between four HDR modes (including HDR emulation) and the Brightness Intelligence Plus mode that softens bright areas while preserving contrast levels based on ambient brightness and color temperature.
Moving on to connectivity. The BenQ EW277HDR is equipped with a D-Sub connector to maintain compatibility with legacy systems as well as two HDMI 2.0a inputs (presumably with HDCP 2.2 support but that is not confirmed), so they can be plugged to PCs, consoles, STBs, media players and so on. To enjoy HDR10 video content, users will need to have a graphics adapter with a driver and software that support the standard. Meanwhile, for HDR gaming, virtually all contemporary GPUs with up-to-date drivers and an HDMI 2.0a output are going to work. Of course, the latest game consoles from Microsoft and Sony support HDR10 for video and games right out of the box. To simplify setups featuring the monitor, it has two 2 W speakers and 3.5-mm audio in/out jacks.
|BenQ 27" FHD Display with HDR10, DCI-P3|
|Native Resolution||1920 × 1080|
|Response Time||4 ms GtG|
|Brightness||300 cd/m² typical
400 cd/m² in HDR mode
|Viewing Angles||178°/178° horizontal/vertical|
|Color Saturation||100% sRGB, 93% DCI-P3|
|Inputs||2 × HDMI 2.0
1 × D-Sub
|Audio||2 × 2 W speakers
|Mechanical||Chassis Color||Metallic Grey|
|VESA Wall Mounting||none|
|Tilt, Swivel, Pivot Adjustments||none|
BenQ’s EW277HDR display is already available for $269 from Amazon and some other retailers. This is $80 more than the company charges for a 27” FHD VA monitor, but trendy features like DCI-P3 and HDR10 naturally come at a price.
- Acer Releases ET322QK LCD: 31.5-inch VA, 4K, HDR10, FreeSync, Around $500
- BenQ Launches the SW271 Display for Professionals: 27-inch 4K with HDR and DCI-P3
- BenQ Launches the SW320: a 4K Display with HDR for Professionals
- Pre-Orders for LG’s 32UD99 Display Available: 4K, DCI-P3, HDR10, FreeSync for $999
Post Your CommentPlease log in or sign up to comment.
View All Comments
wolrah - Monday, December 11, 2017 - linkIsn't 400 nits pretty low for HDR?
euskalzabe - Monday, December 11, 2017 - linkIt is, you want 1000 nits. They claim the HDR support because it can display HDR10 signal, plus with the supposedly good DCI P3 coverage you'll see some benefit in better colors. You won't get the full contrast benefit from HDR since the brightness is just average.
Gothmoth - Monday, December 11, 2017 - linkthe brightness is not even average.... not for a real HDR display.
Gothmoth - Monday, December 11, 2017 - linkit is.. my TV has over 1400 nits and it´s "good enough"... puting HDR on a display that only has 400 nits is a sad joke.
JoeyJoJo123 - Monday, December 11, 2017 - linkAww, I wanted an affordable 10-bit panel. VA for contrast sounds like an interesting option and I guess with the right backlight you could get a good color gamut.
Hurr Durr - Monday, December 11, 2017 - linkBenq *VA panels are decent if you have something to do calibration. Never trust those plant calibration claims.
Alistair - Monday, December 11, 2017 - linkWider color space with 8 bit color means less precision. Was really hoping for a quality 10 bit panel also. No 10 bit, no sale.
Dizoja86 - Monday, December 11, 2017 - linkI like how this article states that 400 nits is too low for HDR, and then the next article is about VESA setting 400 as the lower end spec for HDR displays.
kaspar737 - Wednesday, December 13, 2017 - linkThis monitor has been available in Europe since August, I wonder if they released it again because of now meeting the requirements for DisplayHDR 400?
nerd1 - Thursday, December 14, 2017 - link27 inch FHD??????????