There are many ways to do something different in the motherboard space, especially with respect to functionality and design. In terms of the design element, we have seen many motherboards recently go for a black and red theme, but in the past we had yellow, pink, and all sorts of interesting combinations. Upon popular request, ASUS is releasing the ASUS Z97 Mark S, an arctic camouflage special edition version of the TUF Z97 Sabertooth Mark 1. We were lucky to get motherboard number #0001 for review.

ASUS TUF Z97 Mark S Overview

We first saw the Mark S back at Computex, where it had the development name ‘Sabranco’ (that’s Sabertooth mixed with ‘branco’, the Portuguese for white). At the time a few media at the event remarked that the name did not roll off the tongue, and instead ASUS has called it the Mark S. At the time we mentioned that the color scheme was ambitious, but it transpired that the design was very well received by a lot of readers in the ROG forums and elsewhere with Computex coverage.

The Mark S, in its base explanation, uses a motherboard color scheme to benefit the arctic camouflage TUF Thermal Armor. This means a white PCB, appropriately colored heatsinks and port connectors, and a set of accents on the overall theme. The Z97 Mark S will be a limited edition model with each motherboard labelled with a four digit number to signify where was in the production line. We were lucky enough to source the genesis model, #0001, which we will send back to ASUS after the review where they might give it away in a contest or use it for a presentation build. I tried my best not to break it!

­As with other TUF motherboards with Thermal Armor, the air around the power delivery can be directed in and out in such a way to optimize the direction of airflow for the build:

In the package of the motherboard are a series of slot and port protectors, along with additional small fans for the center of the board and the rear panel.

ASUS’ TUF range comes with a five-year warranty compared to the standard three-year. In terms of feature set, the Mark S follows the Mark 1 – six SATA ports from the PCH with two from an ASMedia controller, four USB 3.0 ports on the rear with another four via an onboard header, x8/x8 PCIe layout for dual GPU setups, Realtek ALC1150 audio with PCB separation and a dual network setup via an Intel I218-V and Realtek 8111GR NIC.

The BIOS gets a slight tint change indicative of the Mark S, with the grey background given a white accent. The software is the package from the TUF range, featuring Thermal Radar and adjustable fan control that allows the user to specify a temperature range based on several of the dozen sensors on board.

The Mark S performs well in our benchmarks, with some of the system benchmarks being top tier. It scores the best ever result we have had with DPC Latency at 29 microseconds, along with a strong audio performance and sub-11 second POST times.

The Mark S will retail and a slight premium above the Mark 1, which is currently $260. As of yet ASUS has not decided how many of these motherboards they will make, but pair it up with similarly styled DRAM, a chassis and CPU cooler and it will look mightily impressive. It is easy to get carried away with the looks of the board, but from a pragmatic standpoint it is still a TUF / 5-year product. Although the range of extra controllers is not totally impressive (one could argue there is space for a WiFi card on the rear panel or an M.2 between the PCIe slots) for the price point, the styling and package go well together and the component choice for longevity is important to keep in mind.

Visual Inspection

Out of the box our motherboard came with the Thermal Armor attached although none of the slot or port protectors were in place, neither were the two small fans. Users will have to add these as their planned build dictates, but none of them are absolutely necessary. I know some users are not fond of the smaller sized fans and ASUS makes them not compulsory for the warranty, although they do have full control of the RPM in software to keep them in a low power and silent mode.

Most of the motherboards we get in to review have their PCB exposed, although the use of Thermal Armor here does not distract from some of the core elements we can examine. The socket area is open, although due to the use of directed air baffles it can be difficult to attach large coolers that do not conform to Intel specifications. We have been using Nepton 140XL liquid coolers for our reviews recently, and not only were the tubes from the pump blocked by the thermal armor (meaning we had to put the tubes next to the memory which pressed against one of the DIMMs), but because CM use a combined AMD/Intel backplate outside Intel specifications, the backplate required a lot of force (probably not advised) to get a fix. Other liquid cooler designs might work a lot better, but that Intel x-y specification is a stringent one especially on three sides of the socket.

There are six fan headers on board, four within reach of the socket and another two on the bottom of the board. At the top of the board is also an assistant fan connector so users can attach the bundled fan. All the headers are controllable through the Thermal Radar software as part of AI Suite.

The DRAM slots to the right of the socket have latch mechanisms on the top only, meaning users should make sure that their memory is firmly in place. Normally around this area of the board we would see a lot of components dealing with data, power and signaling on the PCB, but the use of the Thermal Armor keeps the design tidy and aesthetically straightforward.

The top right of the motherboard has ASUS’ MemOK button for DRAM boot failures along with one of the fan headers and the 24-pin ATX power connector. Beneath this is a USB 3.0 header (from the PCH), and the system SATA arrangement.

Six SATA 6 Gbps ports are provided by the PCH, with ASUS also supporting one SATA Express drive. We are now several months on from the initial SATA Express glimmer making its way into motherboard demonstrations at Computex, but the lack of drives on the market is making me wonder about the long-term prospects of this technology. There are another two SATA 6 Gbps ports on the bottom of the motherboard powered by an ASMedia controller, and all of these ports have protectors bundled in the package.

On the bottom of the board we get our front panel headers, two USB 2.0 headers, another USB 3.0 header (PCH), a TPM header near the rear audio and a Thunderbolt header. In the bottom right corner with the audio, the Realtek ALC1150 codec is just popping out from the Thermal Armor, but inside the PCB separation is used for better audio signal. Unlike some of ASUS’ other audio implementations, this does not feature an EM shield but does use filter caps. Nevertheless, our audio benchmark results were rather good.  Unfortunately we do not get power/reset buttons here for quick testing.



The rear input/output panel, like other TUF boards with Thermal Armor, leaves a gap between some of the ports for airflow. As mentioned above, the system as it comes does not have the small fan installed and users will have to do it manually if they want it. Aside from the fan we get four USB 2.0 ports, a BIOS Flashback button, DisplayPort and HDMI, two USB 3.0 ports from the PCH, two USB 3.0 ports from an ASMedia controller, an Intel I218-V NIC, a Realtek 8111GR NIC and a set of audio jacks.



In keeping with the white theme, the rear shield is also white with a TUF logo.



The rear of the motherboard is also in white, with the Thermal Armor sporting a TUF and Limited Edition logo. This makes me wonder if this would be more ideal for a system that could show off the front and the back of the PC. This is a challenge to any chassis manufacturers that might be reading!

Board Features

Price US (Newegg)
Size ATX
CPU Interface LGA1150
Chipset Intel Z97
Memory Slots Four DDR3 DIMM slots supporting up to 32 GB
Up to Dual Channel, 1333-1866 MHz + OC Modes
Video Outputs HDMI
Network Connectivity Intel I218-V
Realtek 8111GR
Onboard Audio Realtek ALC1150
Expansion Slots 2 x PCIe 3.0 x16 (x16, x8/x8)
1 x PCIe 2.0 x4
3 x PCIe 2.0 x1
Onboard Storage 6 x SATA 6 Gbps, RAID 0/1/5/10
2 x SATA 6 Gbps via ASMedia
1 x SATA Express
USB 3.0 4 x USB 3.0 on Rear Panel (2 PCH, 2 Asmedia)
4 x USB 3.0 via headers (PCH)
Onboard 8 x SATA 6 Gbps
1 x SATA Express
2 x USB 2.0 Headers
2 x USB 3.0 Headers
6 x Fan Headers
1 x ASST Fan Connector
Front Panel Header
Front Audio Header
MemOK Button
Thunderbolt Header
Power Connectors 1 x 24-pin ATX
1 x 8-pin CPU
Fan Headers 2 x CPU (4-pin)
3 x CHA (4-pin)
1 x ASST (3-pin)
1 x ASST Connector 2 x TUF (3-pin)
IO Panel 4 x USB 2.0
4 x USB 3.0
BIOS Flashback Button
Intel I218-V NIC
Realtek 8111GR NIC
Audio Jacks
Warranty Period 5 Years
Product Page Link

Part of the cost of the board will be for the Thermal Armor, then some more for the TUF rated components, and then there might be an additional cost due to the special addition nature of the model. At this point in time we have not been told the final cost for the US version, but we expect it to be around the $260-$300 mark.

Comments Locked


View All Comments

  • ZeDestructor - Monday, November 10, 2014 - link

    I also live in the Australian summer, with no aircon, so 40°C ambient is just fine as well.
  • HanzNFranzen - Monday, November 10, 2014 - link

    Actually, I always thought that the cover was a good idea because the small air space between it and the motherboard would insure that all airflow being pulled through is in contact with the components which would cool better. Perhaps I'm thinking about it wrong though.
  • monkeydelmagico - Monday, November 10, 2014 - link

    I've got a previous gen z87 sabertooth and can say that the plastic shroud is a royal pain when it comes time to swap fans or gpu. The shrouds make getting your fingers in or around components very difficult.

    Otherwise it's a great mobo.
  • LtPage1 - Monday, November 10, 2014 - link

    Looks like cheap, childish plastic to me.

    To each his own, I suppose.
  • Egbert Souse - Tuesday, November 11, 2014 - link

    I agree...looks like it should include little plastic soldiers.
  • twizzlebizzle22 - Monday, November 10, 2014 - link

    Not read this yet. I just wanted to comment to tell you my pushbullet channel worked. The anandtech RSS feed and pushes me any articles with the word "review" in the title.

    I read everything on this site usually, but I like the reviews best of all!
  • ezorb - Monday, November 10, 2014 - link

    I love the look of this and want it in my life, BUT, I hate fans on motherboards, they are always cheep and die young, or they are good, and scream. So i will not be buying this otherwise Awesome board.
  • Jon Tseng - Monday, November 10, 2014 - link

    Hmmm... But weren't we taught in Physics class that white is a poor colour for radiating heat???

    Back to black!
  • AnnihilatorX - Monday, November 10, 2014 - link

    To be honest black or white the color won't make much difference because it's made of plastic. If they are metal on the other hand it may be detectable, albeit not much, given thermal gradient of motherboard components aren't that high anyway.
  • WithoutWeakness - Monday, November 10, 2014 - link

    Fans blowing air over the surface of components cools by convection and isn't impacted by color. You're going to get far more heat transfer in a traditional PC from convection than you are from radiation.

Log in

Don't have an account? Sign up now