In and Around the In-Win GT1

I don't want to start the review on such a down note because it's important that In-Win get a fair shake, but the styling on the GT1 is...problematic. The inspiration from racing cars isn't awful, but a case is not a car (or a box of ammunition for that matter), and unfortunately the GT1 turns into the kind of ostentatious case design that even old stalwarts like Thermaltake are starting to move away from. This isn't the ugliest case I've ever tested (that's a dubious distinction reserved for the Cougar Challenger), but with limited exception I think most of you will agree the GT1 isn't going to win any beauty contests.

The front of the GT1 features the I/O cluster at the top, above three 5.25" drive bays with mesh covers, and then an unusual mesh intake design on the front. The odd-colored honeycomb is meant for user customization; you can add or remove the red rings as you see fit. Unfortunately the lights that surround the I/O at the top are blue LEDs; dim ones, but those lights are also intended to be connected to the IDE activity lead and I can see them getting disconnected in a hurry.

In-Win continues the auto and honeycomb motif on the top of the enclosure. There's an indented SATA hotswap bay that sits behind the power button, reset button, and fan control. The fan control is a single switch that shifts between "Silence" and "Turbo" modes, and as you'll see later, it's more than a little bit clunky.  There's a massive window with an In-Win logo on the side panel, but both panels are extruded. I appreciate the symmetry, at least; extruding the panel behind the motherboard tray improves space for cable management at least.

Remove the thumbscrews from the two side panels and pop them off (they use the dreaded notched mounting system) and you can get to the meat of the GT1. There are a few interesting things going on in here. First is that the mounting stand-offs are extruded from the motherboard tray, which will make mounting our test board much easier. Second, the cabling channel is surprisingly narrow, as are the routing holes, and this does cause some problems down the road. Third, the case's existing wiring routes fan lines beneath the motherboard. I don't think this is a particularly bad idea, it's just unique. Fourth, there could've been support for seven drive trays in the cages, but In-Win only includes six, and opts not to notch the set of rails below the top two trays.

Gallery: In-Win GT1

The reality is that some of the design choices in the GT1 are really smart, and others are baffling. Features have basically been left on the table for reasons I can't understand (but are likely related to cost.) There's space for a seventh drive sled in the case, but they simply don't include it. They could've gone with two USB 3.0 ports and just forgone USB 2.0 entirely, but they didn't. When we get to cabling, you'll see how they cut corners on the fan controller, too.

Introducing the In-Win GT1 Assembling the In-Win GT1
Comments Locked

67 Comments

View All Comments

  • Sleepingforest - Friday, March 15, 2013 - link

    No, the backup shouldn't always be plugged in, otherwise whatever damage happens to the computer (fire, flood, virus, and so on) won't happen to the backup drive. If you get a good external drive, moving it while it's off has no consequences--you know, the thing people do with laptops? There are cameras with USB 3.0 because it's faster, as seen here: http://usbtips.com/nikon-d800-dslr-launches-with-s... I happen to use my phone even when I sit at a computer, so it's helpful to charge it while it's next to me.

    So no, you look like the idiot here. You have a narrowly focused world view that can't comprehend usage scenarios beyond your own, you don't think through anything you say, and most of what you say is insults anyway.
  • dawp - Sunday, March 10, 2013 - link

    why can't we flag obvious spam like this?
  • CeriseCogburn - Tuesday, March 12, 2013 - link

    Because although Anandtech favors whining crybaby commentears, they do not like rude non first amendment jerks who wish to dominate and control everyone else, when it is clear you don't like it, since you wasted our time whining about it and bringing more attention to it.
    I know, it's hard not to get some revenge satisfaction voting people off the comment area like a 3rd world dictator, if you want that crap go to toms - oh wait you do, then in a frenzy -20 as many people who talk sense as you possibly can, causing everyone else who doesn't have a bleeding tampon on display constantly having to go through the trouble of unhiding the often sentient comments you idiot fanboy whiners have hidden.
    Now, that's why I say, and admittedly for the first time ever that may not be exactly correct, but you did ask, you power hungry evil person, and you got an answer.
  • keithh - Monday, March 11, 2013 - link

    I'm guessing that you don't pay the electricity bill. I did the math and it was cheaper for me to decommission a bunch of smaller drives and replace them with a single 2TB drive. The cost was recovered in a couple of years. Further, the newer drives are faster, quieter, and cooler.

    I second the recommendation to invest in a NAS.
  • CeriseCogburn - Tuesday, March 12, 2013 - link

    Umm, excuse me - but after "several years" of saving 5 watts per drive or so, and you've finnally "recouped your initial costs", although that isn't counting the possible REAL INVESTMENT of that added expense and the wonder of combined interest, you want to spend a wad on a very expensive rip off NAS ?
    LOL
    Dumb as can be, NAS is an "investment"....
    Computer parts are not investments - you know maybe - if you are really goofy and you go to the raving loon retro section of ebay you could get a bit more than scrap weight price after a few years.
    You aren't INVESTING, okay ?
    Pass that along to the thousand other wannabe faux acting CEO's on this board, won't you ?
    Spending on crap that depreciates faster than cars is NOT an investment.
  • keithh - Monday, March 11, 2013 - link

    Uh, no Director12, that would give him a whole *4* GB of mirrored data. That's more than enough for lots of applications - especially if you have your important stuff (photos & music) on the NAS in the basement.
  • xygtshadow - Wednesday, March 13, 2013 - link

    I do have a pair of 4GB drives from the 90's... But I couldn't fathom using them anymore. They're horrendously slow and my motherboard doesn't even support PATA ribbon cables.
  • angryblanket - Monday, March 11, 2013 - link

    1x usb 3.0 port and this thing looks like crap?! It would be OK without the brand naming but my goodness that huge "I U" in red makes me want to willingly gouge my eyes out.
  • CeriseCogburn - Tuesday, March 12, 2013 - link

    Please do as they obviously are not used to read articles, thus saving you pain and suffering on your artsy fartsy doofus assessment, better for the feminine area of some girly tupperware get together.
  • sarahjordan - Tuesday, March 12, 2013 - link

    How to enlarge a profile picture of a Facebook account

    In this article we show you something on Facebook allows you to enlarge any image on facebook even if it is protected, that due to an error in the image URL on facebook, you can return the the size of the photos before the main added, making it without loss of image quality when enlarged, because we really did not return to its normal size, this thing is nice Try it with your friends and not forget to comment.

    The best way to view photos on Facebook!
    MAKE SURE YOU ARE USING THE LATEST VERSION OF GOOGLE CHROME (AT LEAST VERSION 18.xx).

    Facebook Photo Zoom is a free Google Chrome extension that automatically displays the full version of Facebook photos when you hover your cursor over it. and it is easier to recognize friends and other familiar faces, it saves a lot of time on the opening of each image separately, especially if your connection is weak.
    Google Chrome extensions usually download and install in a flash, and you do not need to restart your browser to begin using them. Facebook Photo Zoom is managed from the Extensions page in the Tools menu, but unlike many other Chrome extensions it actually configure some options, such as a slider to set the opacity zoom tool shortcut , and fields for carrying molten image milliseconds. There's even a help page, another nice departure from the usual documentation offered few add-ons for Chrome, which we assume are usually quite simple not to require any instruction.
    So how does Facebook Photo Zoom? All right. We traveled to a friend's page and spotted a few photos. Hovering the cursor over an image opens a pop-up with a full view, and roll the cursor was closed just as quickly and smoothly. It does not matter if the image was published in a photo album or on a wall, Facebook Photo Zoom blew to normal size when moused over. If you are a Chrome user who spends a lot of time on Facebook, this extension is essential. If you live on Facebook, but have not yet tried Chrome, here's your chance!

    to download this plugins :
    http://www.proshop.im/2013/02/how-to-enlarge-profi...

Log in

Don't have an account? Sign up now