Intel Announces SSD DC P4501 Low-Power NVMe SSD With 3D NANDby Billy Tallis on June 5, 2017 8:01 AM EST
- Posted in
- Enterprise SSDs
A month ago, Intel unveiled a new generation of enterprise SSDs based on their 3D TLC NAND and powered by a new generation of Intel NVMe SSD controllers. Intel's first NVMe controller—introduced with the SSD DC P3700—had a great run, but it's been showing its age for a while now. The new controller used on the P4500 and P4600 enables higher performance despite the new drives using 3D TLC NAND compared to the P3700's 20nm planar MLC, and despite the newer controller having only 12 flash channels instead of 18.
More significantly, Intel's second-generation NVMe controller is much smaller and more power-efficient, allowing it to be used in product segments that Intel's first generation controller literally couldn't fit in. Intel's new SSD DC P4501 is a lower-power take on their new generation of NVMe technology, putting Intel controllers into M.2 and 2.5" 7mm U.2 SSDs for the first time. With capacities from 500GB to 4TB, the P4501 delivers somewhat lower performance than the P4500 and P4600, but with reduced power consumption and substantially higher density.
Intel has previously shipped the SSD DC P3100 M.2 SSD, but despite using the same 3D TLC, it was not at all in the same league as the P4501. The P3100 is based on the same platform as the consumer Intel SSD 600p, with a Silicon Motion controller, poor sustained write speeds and no power loss protection. The P3100 was pitched as a boot drive for servers, but the P4501 can be a serious workhorse. The P4501 supports the same advanced feature set of its bigger siblings, including full power loss protection, NVMe Management Interface, and support for up to 128 queues for optimal performance even in systems with the highest CPU core counts. The P4501 even comes with a slightly higher endurance rating than the P4500.
|Intel NVMe Datacenter SSD Comparison|
|Form Factor||PCIe HHHL or 2.5" 15mm U.2||M.2 22110 or 2.5" 7mm U.2|
|Interface||PCIe 3.1 x4 NVMe 1.2|
|Memory||Intel 384Gb 32-layer 3D TLC|
|Capacities (TB)||1, 2, 4 TB||1.6, 2, 3.2 TB (U.2)
2, 4 TB (HHHL)
|500GB, 1TB, 2TB, 4TB (U.2 only)|
|Sequential Read (64kB) (up to)||3290 MB/s||3280 MB/s||3200 MB/s|
|Sequential Write (64kB) (up to)||1890 MB/s||2100 MB/s||900 MB/s|
|Random Read (4kB) (up to)||710k IOPS||702.5k IOPS||360k IOPS|
|Random Write (4kB) (up to)||68k IOPS||257k IOPS||46k IOPS|
|Maximum Power||Read||10.9 W||9.9 W||8–12.5W (U.2) 6–8.25W (M.2)|
|Write||18.3 W||20.7 W|
|Write Endurance||Random workload||0.7 DWPD||2.9 DWPD||1 DWPD|
|Sequential workload||4.62 DWPD||4 DWPD||3 DWPD|
|Warranty||5 years||5 years|
The M.2 version of the P4501 will provide capacities up to 2TB on a 110mm long card, larger than normal for consumer M.2 SSDs but typical for enterprise SSDs that include power loss protection capacitors. The 2.5" U.2 version uses the same 7mm thickness as consumer SSDs and many of the more value-oriented enterprise SSDs, compared to the 15mm thick form factor that Intel's previous enterprise SSDs have used for thermal dissipation reasons even when the extra volume was not necessary for higher storage capacity. The U.2 version of the P4501 will provide capacities up to 4TB.
The P4501 will support tunable power limits: the U.2 version can be capped at 8W, 10W or 12.5W while the M.2 version will support limits of 6W or 8.25W. Idle power is not a priority for datacenter SSDs, but the U.2 version is specified for less than 5W at idle and the M.2 version is specified for less than 3W.
Intel's first-generation NVMe controller came to the consumer market in the SSD 750, the first consumer NVMe SSD. It raised the bar for consumer SSD performance, but as soon as truly client-oriented solutions like the Samsung 950 Pro hit the market, the SSD 750's inconveniently large form factors, high power consumption and lower peak performance started to erode its cachet. The new Intel SSD DC P4501 shows that Intel is in a position to offer a new generation of high-end client NVMe SSDs that will be much better fit for today's market. With new firmware optimized for client workloads and possibly with cost savings from dropping the power loss protection or using Intel's upcoming 64-layer 3D TLC NAND, Intel could have a serious contender for the consumer market in the near future.
Post Your CommentPlease log in or sign up to comment.
View All Comments
stux - Friday, July 7, 2017 - linkActually, the 21110 (ie 110mm) formfactor is used so that they can add the additional Power Loss Protection circuitry and capacitors by simply extending the 2180 (ie 80mm) formfactor. That's primarily the 4 big capacitors on the left side of the article's main picture.
Wish they'd make a small one in 2280 though :(
Lord of the Bored - Thursday, June 8, 2017 - link"Do I need to build a thunderzolt to U.2 breakout box to prove you wrong?"
Yes. Not even my argument, but I wanna see a TB-U.2 adapter.
Bullwinkle J Moose - Monday, June 5, 2017 - linkI don't have ANY internal drives on any of my computers
A single U.2 could be attached to a thunderzolt port with a single cable
I would only want a breakout box for RAID U.2 drives
If Optane SSD's can be made to operate at high temps without throttling or destroying themselves, we might see smaller USB-C/thunderzolt thumbdrives that you could boot to as well
Silicon carbide LED lights work great at higher temps than the older gen LED's and with less heat sink material
If you can build bootable thumbdrives the same way and make them waterproof, I'll buy a dozen!
It would be nice to have a thumbdrive faster than an internal SSD that I can drop into a cup of water to cool down before sticking it in my pocket and a 6" extender cable would prevent finger burns when unplugging it
Heat is not the problem if you do this right!
I want FAST / portable / bootable drives as small as possible
AnTech - Monday, June 5, 2017 - linkThe gold master now is Samsung SSD. Check out Samsung Portable SSD T3 to boot Mac and work from it all day log. And keeps cold!
Bullwinkle J Moose - Monday, June 5, 2017 - link
"The gold master now is Samsung SSD. Check out Samsung Portable SSD T3"
I need a portable drive that boots to SATA or ESata like the 850 Pro
If I want a portable drive to be limited to strictly a USB O.S. like Win2Go or Linux, I just use my Corsair GTX
Thanks anyway though
All my boot drives are portable but not all of them are limited to just USB
JoeDuarte - Monday, June 5, 2017 - linkNice article Billy. I noticed in the table that the interface is PCIe 3.1 rather than 3.0. What are the implications of that? What does features does 3.1 bring to the the table?
Bullwinkle J Moose - Tuesday, June 6, 2017 - linkWoggs says.....
"Bingo. These aren't for your laptop. The top side can have heat management solutions in servers the bottom side can't. This is critical because the expectation is 24/7 full speed operation in the smallest possible form factor."
"I was talking about the thermal and capacity reasons the server market uses M.2 22110 the jamb a ton of these into a single server. What the hell is your point?"
The point Mr Woggs is that you are making assumptions about "other peoples" laptops and how they will or will not be used
By making an assumption for "other peoples" laptops, did you take into consideration that....
A. It comes in U.2 form factor?
B. Others might access and use even the M.2 drives in a server rack from their laptop?
(ever heard of onedrive, google drive or dropbox?)
Would I use these for my laptop?
NO, but I "Could"
Please make your assumptions about your own laptop to avoid the confusion
You really have no clue as to what "others" will use these drives for
What the hell is your point?