Conclusion

In a densely populated market of cooling options, ARCTIC's Liquid Freezer III 280 A-RGB White AIO cooler manages to stand out, highlighting the company's persistence on releasing ever more competitive products. ARCTIC's A-RGB White AIO model focuses on a blend of high performance and visual elegance with its A-RGB features and all-white appearance, suitable for users who prioritize both efficiency and aesthetics in their setup.

A key feature of the Liquid Freezer III is its seamless aesthetic appeal, particularly in the A-RGB White version, which offers a visually stunning setup without the clutter of excessive cables. The Liquid Freezer III 280 A-RGB White also features a 38mm thick radiator that improves its heat dissipation capabilities, although its size might pose compatibility considerations for some cases. Nonetheless, this design choice significantly increases the heat exchange area, promoting superior cooling performance. Its fans and main block are designed for optimal airflow and cooling efficiency, with the added benefit of a small fan for VRM heatsink cooling – a thoughtful inclusion not commonly found in AIO coolers.

The ARCTIC Liquid Freezer III 280 mm cooler exhibits commendable performance under standard operational condition - however, adjustments to fan speeds result in a minimal impact on its cooling efficiency. This phenomenon suggests a disconnect between the size of the heat exchange area and the cooler's capability to transfer thermal energy from the CPU to the radiator – that the two parts have been disproportionally sized in capacity. Notably, the primary limitation appears to be the contact plate, indicating that while the cooler performs adequately within its designed parameters, it possesses limited potential for further enhancement. Consequently, for users accustomed to having access to a range of thermal performance levels through fan speed adjustments and/or upgrades, the Liquid Freezer III 280 mm may not meet their expectations. It is very a solid performer – there's no doubt about that – but the design is playing close to the edge of its potential right out of the box.

Perhaps the strongest competitive point of the Liquid Freezer III 280 mm cooler, and that of the entire series, is its comparatively low retail price, especially with the prices ARCTIC announced with the release of the series. In celebration of 23 years of ARCTIC's presence in the cooling industry, a special 23% discount is available until the 20th of May, making the Liquid Freezer III an even more attractive option for consumers looking for a solid AIO cooling solution without breaking the bank. ARCTIC managed to lower their build costs so much mainly through the strategic use of materials and the minimization of the product’s packaging and bundled items. Among other things, ARCTIC has passed on including a printed manual or RGB driver with the kit, which reduces the production cost of the coolers a little bit as well. Overall, while the extensive use of plastic might raise questions about quality for some, ARCTIC addresses these concerns head-on with a generous 6-year warranty, offering peace-of-mind for consumers.

In conclusion, the ARCTIC Liquid Freezer III 280 A-RGB White AIO cooler not only offers competitive cooling efficiency and a striking visual design but also represents a smart investment with its current promotional pricing of $99. Its thoughtful design and the inclusion the small VRM cooling fan, sets it apart in the crowded cooling market. For those seeking a blend of aesthetics, performance, and value, the Liquid Freezer III emerges as a compelling choice.

Testing Results
Comments Locked

8 Comments

View All Comments

  • Maksdampf - Wednesday, March 13, 2024 - link

    Coldplate size (thats the technical term, not „contact plate“) being too little is not a reason for the bad performance. What matters is not the size of the copper chunk, but its active area. The active finned area must be the same size or larger then the DIE underneath the IHS. But the fin area and water channels are similarly sized as the competitors.

    More likely your decades old testing Station has a far thicker baseplate or DIE size compared to a real CPU, so the measurements are not realistic. Time to make a new DIE simulator.

    But i assume there is something else wrong too.
    The baseplate in the Liquid freezer II is the same, but it is performing better, so this test result must be worse due to a bent IHS or a fault with the mounting hardware.

    Since every other media outlet so far has seen improvements compared to the LF II series, i would not have published these results without further research into the issue.
  • E.Fyll - Wednesday, March 13, 2024 - link

    The descriptive term "CPU contact plate" is very frequently used by professionals and amateurs alike. True, the correct technical term for liquid coolers is "cold plate" but I personally choose to use casual language and descriptive terms when appropriate, as I don't expect every single reader to be familiar with the technical terminology.

    The mass and size of the cold plate do matter in several ways. The "active" area does matter but it is not the only thing that does. It actually doesn't even matter the most - the shape is what matters the most as it affects both the movement of the liquid (boundary layer fluid mechanics) and the transfer of energy between the mediums. If the liquid contact area of the cold plate was all that mattered for performance, it would be shaped in the form of a small rectangular finned corridor for the fluid to flow through, similar to how finned radiators are shaped, multiplying the liquid contact area compared to current designs. Still, that design doesn't work quite well despite the much greater liquid contact area, for a number of reasons.

    The testing station does not fully replicate a specific CPU's die, which is a very high thermal load concentrated in a very small area, but spreads the thermal energy almost evenly across the entire contact plate, replicating an ideal 40x40 IHS. It is perfectly valid for measuring the thermal resistance of coolers without relying on case-specific parameters. If I were to make the faux die that is the exact shape and die of any processor, the test results would be completely incomparable not only between generations of processors but between different sockets as well.

    I have learned not to take too much heed to other people's test results as I frequently cannot match mine with those no matter how hard I try. I did double-check this review's test results because I found them very strange myself, which is why the review was late (again). Yes, the cold plate may be similar/identical but not the entirety of the cooler is. There are myriads of factors that affect performance, down to the very paint on the radiator.

    For those that are a bit distrustful, or even cynical, one should also consider that I could very well be "cooking" the results to whatever I want and avoid confrontations such as this one but, as you can tell, I choose to go with the actual readings and deal with the fallout instead.
  • Maksdampf - Thursday, March 14, 2024 - link

    Yeah, i get it, turbulent flow for boundary layer separation is important too. I wasn't saying that the internals don't matter, and you weren't saying anything about internals in your article either. I was just saying that you can't judge a book by its cover or a waterblock by its coldplate size.
    The mass of the coldplate is really not that important. A heavier and thus thicker coldplate performs worse in most cases because even pure copper would be an insulator between the flowing water and CPU, adding thermal resistance. Also when talking about thermal mass, you mean thermal capacity most likely. Thermal capacity of copper is almost negligible compared to water. So if you wan't mass simply for thermal inertia in a waterblock it is much better to have water there instead of copper soaking up the heat. So less copper performs better in many cases.

    I understand that the somewhat bad results of this CLLC are most likely down to the test platform specifics and not your thorough measuring process. But still, how valuable are they then?

    If you knew this and even doublechecked the results, how could you not write something about this discrepancy and its most likely cause in your review? Instead you make something up with coldplate size, which doesn't matter on a real CPU and only the very thermodynamics literate and curious people can summize that the Testing setup may be the reason here why this CLC performs so bad an others so well.

    I get it that you don't wan't to throw away 20 years of comparability between coolers by still using the same platform. But then i don't undertsnd why you are not using any of the Data. Why is the graph not a javascript generated one where i can select my comparision with a drop down menu?

    I also don't get these 12V and 7V measurements instead of noise normalized bar charts which are much easier to undertand for a consumer. 20 years ago people limited their fanspeed by connecting it to the +12V and +5V DC from the PSU directly, but nowadays in the Age of PWM nobody cares.
    All other outlets have switched to noise normalized values, which you could be doing too, since you have the data vor a curve. But you chose not to.

    I myself was developing waterblocks 20 years ago and hat a very similar test platform using a microcontroller and a fet heater. I used a Athlon64 IHS with a small 15x15mm copper block soldered onto the middle where the fet was screwed onto and a probe was drilled inserted in a small drilled hole on the side to measure exactly central to the die.
    Even this had slightly different results to real CPUs. I have stopped doing that back then since i could not be true to my aspirations.

    These Tests are not good for anybody looking for an AIO or Aircooler today. Things like offset mounting for AMD or contact frame play a huge role and you just ignored that.
  • osv - Friday, March 15, 2024 - link

    re: your misplaced claims, for instance, "These Tests are not good for anybody looking for an AIO or Aircooler today"

    what i see is that you didn't actually read the review, and therefore your comments are not helpful, and your criticisms are not valid.

    for example, your claim: "nowadays in the Age of PWM nobody cares"... umm no, as the article repeatedly pointed out, the speeds of the pump vs. cooler fans vs. vrm fans can't be controlled individually, which is a drawback for tuners who want those options, and had it years ago... i appreciate that the author made that point wrt price, while you apparently don't understand what matters to people reading these articles.

    i appreciate that the data posted backs up his conclusion that "This places ARCTIC’s latest 280 mm cooler in direct competition with 360 mm AIO coolers and even close to the 420 mm version of the Liquid Freezer II, which used to perform a little better but at a much higher noise level."

    you claimed: "the Testing setup may be the reason here why this CLC performs so bad"... except that it didn't test badly, it was quieter than the competition, which is a high priority for many readers, and the author got that; you didn't.
  • Lolshutupbro - Tuesday, March 19, 2024 - link

    The pump speed, fan and vrm fan can be controlled individually, there is a cable included….
  • m3city - Thursday, March 14, 2024 - link

    I asked this before, but never got a response, and asking google does not really give an answer as well: why is there no comparison to an air cooler? A stock one would be the best, but any would be great. I still don't know what will I gain in terms of loudness, temps, OC/boost headroom?
  • PeachNCream - Thursday, March 14, 2024 - link

    Here ya go

    https://gamersnexus.net/megacharts/cpu-coolers
  • m3city - Friday, March 15, 2024 - link

    Thank you very much! That is exactly what I was looking for.

Log in

Don't have an account? Sign up now