Camera Architecture and UX

In order to really understand cameras in smartphones, it’s important to understand all aspects of the camera sub-system. The first aspect is the physical hardware, which forms the foundation upon which a great camera can be made. In the case of the Xiaomi Mi Note and Mi Note Pro, Xiaomi has elected to use a relatively standard choice for the rear-facing camera, and a relatively interesting one on the front. I’ve included the specs below, with a comparison to the Mi4 to get an idea for what Xiaomi’s previous cameras were like.

Camera Architecture
  Xiaomi Mi4 Xiaomi Mi Note /
Mi Note Pro
Front Camera 8MP 4MP
Front Camera - Sensor ? OV4688
(2µm, 1/3.0")
Front Camera - Focal Length ? 3.53mm
Front Camera - Max Aperture F/1.8 F/2.0
Rear Camera 13MP 13MP
Rear Camera - Sensor IMX214
(1.12 µm, 1/3.06")
IMX214
(1.12 µm, 1/3.06")
w/OIS
Rear Camera - Focal Length ? 3.8mm (28mm eff)
Rear Camera - Max Aperture F/1.8 F/2.0

For both the Xiaomi Mi Note Pro and Mi Note, the rear camera uses Sony’s IMX214 along with an OmniVision OV4688 sensor on the front. If this sounds rather familiar, it’s probably because this is actually the rear camera sensor of the HTC One M7 and M8. Given that some of the major advantages of larger pixels is improved low light performance from reduced read noise, other random sensor noise reductionsand improved dynamic range, it makes sense to use larger pixels on a front-facing camera which is almost guaranteed to never need to do landscape shots. The rear facing camera is generally pretty standard here, but Xiaomi has also added optical image stabilization. It’s interesting to see that the maximum aperture of the Mi Note and Mi Note Pro has regressed compared to the Mi4. It’s likely that this was done in response to a need to decrease the z-height of the module and keep certain distortions from getting to unacceptable levels. I’ve definitely noticed a number of phones this year with noticeable field curvature and other uncorrectable distortions as focal length/z-height decreases and aperture increases, so it’s interesting to see an OEM that is fighting against this trend. The 28mm equivalent focal length isn’t quite as long as one might hope for low distortion, but it isn’t the 24-26mm focal lengths that we’ve seen in a lot of recent smartphones.

Overall, Xiaomi has set up the camera of the Mi Note line with a relatively good foundation at the hardware level. I would’ve liked to see some extra components like phase-detection auto-focus and possibly laser auto-focus to improve AF speed regardless of light levels, but as long as Xiaomi does their part in their contrast AF algorithms it shouldn’t be a huge difference.

Now that we’ve covered the basic hardware, we can start to talk about the factors that affect the user experience of the camera. This can be effectively boiled down to the camera app UI and the latencies involved such as camera app launch, focus, and capture latency. A good camera UI should have all the right controls easily accessible, with a high resolution/frame rate preview, along with good accessibility for a wide range of expertise from all-auto point and shoot to full-manual control and anywhere in between.

In the case of the Xiaomi Mi Note, the camera app isn’t immediately accessible from a dark screen, but swiping left on the right edge of the display will open the camera application immediately like most smartphones today. Once you’re in the camera app you’re presented with a very simple UI. 4:3 and 16:9 resolution modes are both properly represented here with the preview resizing depending upon which you choose. It's worth noting here that in both phones the preview is acceptable, but frame rate and resolution here won't be as good as something like the Galaxy S6 or Note 5. The options that you can change with one tap are photo/video capture, flash settings, HDR settings, and camera switch. Pretty much everything else is hidden in a panel to the left of the display including panorama, countdown timer, refocus, manual mode, beauty mode, and low light mode.

The rest of the settings available are hidden behind a gear icon which opens a long menu. I would personally enable the framing grid and the stabilization mode (which only takes a photo when hand shake won’t affect the sharpness of the photo) but it isn’t magic. One setting I found to be completely necessary here is setting long hold of the camera shutter to focus because the burst mode of the camera doesn’t combine a burst into a single “photo” in the gallery, which means deleting the whole burst can potentially take a few minutes if you don’t realize this. This is a pretty major usability issue but once I set it to not allow burst shot the camera didn’t have any problems.

I mentioned the manual mode option earlier, and it’s pretty safe to say that while I like its presence in the camera application. However, there are a few problems that I noticed. The first is that the manual white balance mode only allows for some pre-determined presets rather than a dynamic slider of some kind. As a result, you’re probably not going to be able to compensate for problems with auto white balance with manual white balance unless the color temperature of your environment happens to exactly fit one of the presets. It’s worth noting though that the ISO range and the focus range are both the same as what their automatic equivalents are capable of, rather than the range of the hardware itself. The exposure controls aren’t quite as good, as the exposure time tops out at 1/1000 of a second, but I suspect most people are going to use auto mode at that point anyways. On the other end of the spectrum, the 32 second maximum exposure time in manual mode is quite possibly the most ridiculous thing I’ve ever seen in a smartphone camera, but really opens up a lot of potential for interesting photos that wouldn’t be possible otherwise.

On the video side, the same settings are basically replicated. However, in order to access the video mode and start recording a video you have to first tap the video button, then tap the record button to start recording. Once again, on the left panel you get a choice of video modes like slow motion, fast motion, and timelapse. This is actually a pretty smart way to approach the problem of usability, but it isn’t necessarily the fastest compared to other interfaces that try to combine both photo and video into a single mode.

Overall, Xiaomi’s camera interface isn’t perfect, but there’s nothing that stands out to be that would make the UI hard to use. I noticed a few problems that should definitely be resolved for a better user experience, but compared to some of the other phones I’ve used in the same segment, the camera application shows far better polish and attention to detail.

While the camera app UI is important, there are still other aspects that we should consider such as camera latency. While we still don’t have a comprehensive way of testing this, our current testing offers a pretty good ideal case camera shot and focus latency. This is done by pointing the camera at a high contrast object that is well-lit like our ISO chart and measuring how long it takes for the camera to reach focus and how long it takes to save a photo. As mentioned previously, Xiaomi is only using contrast detection for focusing, so this automatically places them at a disadvantage relative to OEMs using PDAF or laser AF.

Camera Focus Latency (Shooting ISO 12233 Target)

Camera Shot Latency (Shooting ISO 12233 Target)

In this test, Xiaomi does a decent job on shot latency but an average job on focus latency. To be fair to Xiaomi, I never really felt like the focus was all that unreliable but it does seem to take its time compared to the faster contrast AF implementations out there. For some reason the Mi Note Pro is consistently slower to focus than the Mi Note, but shot latency is consistently faster, which is a difference I actually noticed in day to day use. I'm not sure whether this is due to the Snapdragon 810's new ISP or a change in algorithm on Xiaomi's part, but given the enormous difference in focus latency on the One M9 I would guess this is a change at the ISP level.

I suspect without PDAF, laser AF, or other AF speed up assist mechanisms there won’t be all that much improvement available. If Xiaomi really wants to make the camera UX on par with the best of the best flagships, at least one extra mechanism of that list will be necessary. However, seeing as how flagships this year with contrast AF can be surprisingly slow to focus, Xiaomi isn’t alone here, and I suspect most people won’t encounter a lot of problems. Overall, Xiaomi isn’t necessarily leading the pack, but they’re still competitive with flagship smartphones in camera user experience that cost hundreds of dollars more.

Software: MIUI 6 Still Image Performance
Comments Locked

94 Comments

View All Comments

  • valinor89 - Friday, September 11, 2015 - link

    Xiamomi is about to start trials with some products in the Us and other countries. You could end up having acces to this phone or its successor before long...

    Or do like the people who bought those korean screens early on and import.

    I live in Europe and most of the products reviewed here are not directly avaiable to me, even less at the same relative price, 1€=1$ over here, but I still like to read about new product tendencies, at the minimun it lets me evaluate the products I can get in another light.
  • menting - Friday, September 11, 2015 - link

    How are phones any ground breaking nowadays? There have been 0 phones in the past few years that are groundbreaking, with maybe the exception of the S6 Edge with the curved screen. And if it's fair to whine about something you can't use, then 1) Verizon/Sprint customers will be whining more than 50% of the time here, and 2) Who said you can't use it? Does the lack of LTE make it unusable? BS.
  • Yaru - Sunday, October 4, 2015 - link

    You don't have to care but I very very much do. Not all of their products are only applicable to the US, some of them apply to other countries as well.

    Also, you can buy a Xiaomi phone from the US. Much like I can buy US phones from here. The iPhone 6+ I'm using to type this comes directly from the US (a T-Mobile to be exact). Just because Xiaomi doesn't sell it directly doesn't mean you can't buy it.
  • lilmoe - Friday, September 11, 2015 - link

    That's the worst thing one could ever do really. You should buy a product that has proper support in your country. Good luck finding parts or repairing the device. And good luck if you get a lemon.
  • mforce - Friday, September 11, 2015 - link

    Actually I bought an LG Optimus G made for Korea ( F180L ) which I've flashed with the ROM for E975 but keeping the modem part of the F180L .... I have all the 2G and 3G bands working perfectly here in the EU and the phone has been doign well for 2 years now.

    It is true that it's a risk you're going to make when buying without a local warranty but the seller might still honor your warranty if you send it back. Also yes you need to carefull look at the supported bands but some might just work out fine and be what you need in your country too.

    Xiaomi does make phones which have all the right bands for the EU ( including LTE ) so I'm OK with reading reviews about Xiaomi phones such as this.... this isn't a US only website you know. Maybe folks from China read it too for instance ... Also many Xiaomi phones are available in India where they speak EN so ...
  • DigitalFreak - Friday, September 11, 2015 - link

    You just don't get it. No-one said they shouldn't review non-US phones. Just put a blurb in the beginning saying it doesn't support US bands. Why is that one simple thing so hard for people to comprehend?
  • Pissedoffyouth - Friday, September 11, 2015 - link

    >I'd rather not waste my time reading a review of something that's only available in Asia/Europe.

    Why not? I'm a tech head, I'm happy to read reviews of droids only available on Verizon even though I'm in Europe because its great to see what competition ithere is.
  • menting - Friday, September 11, 2015 - link

    talk about being self-centered! So they'll have to say if it's going to be on Sprint and/or Verizon too I suppose?
  • DigitalFreak - Friday, September 11, 2015 - link

    Yeah, because I'm the only person who reads through a review only to find out they won't be able to use the device.
  • BMNify - Friday, September 11, 2015 - link

    Anandtech is an International website with only 40% of the readership coming from USA and Xiaomi already caters to the largest smartphones markets that is China, India, Brazil, Taiwan, Singapore, Malaysia and Philippines. So, your redneck 'Murican pride is misplaced here.

Log in

Don't have an account? Sign up now