Nixeus VUE27D Monitor Reviewby Chris Heinonen on December 23, 2013 8:00 AM EST
After the wave of cheap 27” monitors from South Korea hit Ebay, a number of vendors started to offer their own inexpensive models. One of the first models to hit the US, and one that I reviewed here, was the VUE27 from Nixeus. Now they have released their newest version, the VUE27D. Stripping the input selection down to a single DisplayPort input, the VUE27D reaches for an even lower price point than before. With all the changes in the display marketplace over the past year, how will the VUE27D fare today?
The display that the VUE27D resembles most is the HP zr2740w. Like that model the VUE27D offers no on-screen display at all, only controls for brightness with no indicator for level. Combined with a single DisplayPort input there really is nothing at all to adjust on the VUE27D. There is a reset button to take the brightness level back to the original setting, but that is it. There are extra buttons that do nothing as well, as it appears Nixeus uses generic off-the-shelf parts.
Compared to the other VUE monitors from Nixeus, the VUE27D is very thin. Most of the screen is very narrow except for the center where the inputs and stand are located. Part of this is managed by using an external power supply to cut down on internal bulk. I’m still not a fan of external power supplies, but it helps keep a display cooler and makes it easier to sell around the world.
The back of the VUE27D is a fine diamond texture as opposed to the flat plastic we usually see. Almost no one will see it because it's on the back of the display, but it is a nice look.
The stand offers height adjustment along with swivel, and you can rotate the display to use it in portrait mode. This is more flexibility than any of the other affordable displays to come my way and makes setup much easier. The specifications indicate there is tilt available, but the model that I have does not tilt at all. The joint might just be adjusted too tight, as I've seen this on other review samples, but in my case it doesn't work.
The anti-glare coating works fine and doesn’t cause the degradation in image quality that people often worry about. Beyond this there isn’t much to comment on for the design of the VUE27D. It drops anything non-essential and only keeps what you need.
|Brightness||380 cd/m2 maximum|
|Response Time||6ms GtG|
|Viewing Angle (H/V)||178/178|
|Power Consumption (operation)||72 Watts|
|Power Consumption (standby)||< 1 Watt|
|VESA Wall Mounting||100mm x 100mm|
|Dimensions w/ Base (WxHxD)||25 5/8" x 24 3/8" x 8 3/8"|
|Limited Warranty||2 Years|
|Accessories||MiniDP to DP cable, DP to DP cable|
|Price||$430 MSRP ($450 online)|
Post Your CommentPlease log in or sign up to comment.
View All Comments
SunLord - Tuesday, December 24, 2013 - linkor $459 on Amazon with prime http://www.amazon.com/dp/B008M08SN6/
pierrot - Tuesday, December 24, 2013 - linkI would love to see a review of those $300 ebay brands like X-Star/Qnix
ZeDestructor - Tuesday, December 24, 2013 - linkThis is such a review. The $300 monitors have all risen in price over the past year or so...
blackoctagon - Tuesday, December 24, 2013 - linkThe QNIX QX2710 Evolution II can still be had for USD307...
pierrot - Wednesday, December 25, 2013 - linkTheyre still $300 - some versions even less (tempered glass)
geok1ng - Thursday, December 26, 2013 - linkTher review does not have information about overclocking ability, whter this monitor can do 2560x1440p above 60hz or not. Most low cost 27" from korea can do more than 100hz @1440p and that information is relevant for the readers of this site.