Testing Methodology

For testing full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.

ATX Test Configuration
CPU Intel Core i7-2700K
(95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V)
Motherboard Gigabyte GA-Z77X-UD4H
Graphics Card ASUS GeForce GTX 560 Ti DCII TOP
(tested at stock speed and overclocked to 1GHz/overvolted to 1.13V)

2x NVIDIA GeForce GTX 580 in SLI
(full fat testing only)
Memory 2x2GB Crucial Ballistix Smart Tracer DDR3-1600
Drives Kingston SSDNow V+ 100 64GB SSD

Samsung 5.25" BD-ROM/DVDRW Drive

3x HGST DeskStar 3TB 7200-RPM HDD
CPU Cooler Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400
Power Supply SilverStone Strider Plus 1000W 80 Plus Silver

Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.

For the "full fat" testbed, the GTX 560 Ti is swapped out for a pair of GTX 580s, and three hard disks are added to fill out the case.

Thank You!

Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.

Assembling the Corsair Obsidian 900D Noise and Thermal Testing
Comments Locked

65 Comments

View All Comments

  • Subyman - Tuesday, April 16, 2013 - link

    I have a 800D and would not purchase something like this again. I really like the case, very well built, and so forth but with boutique manufacturers like Case Labs making thick, aluminum cases that weigh half as much with ridiculous customization, it seems a serious watercooling enthusiast has better choices out there. The 900D looks great and well built, but steel at $349 + 41lbs dry is rough. Believe me, a fully loaded 800D was is ***** to move! No wheel option is a little disappointing as well with something this large.
  • hero1 - Tuesday, April 16, 2013 - link

    This. I had absolutely forgotten about Case Labs as of late. And you do have a good point here and I think most people ought to know that they can have better cases for similar price or slightly more.
  • Blindsay04 - Wednesday, April 17, 2013 - link

    Case labs makes some quality stuff but their pricing is a lot more. SMH10 is $500 and that is probably the closest to the 900D
  • pensive69 - Wednesday, May 15, 2013 - link

    see? Subyman picked up on the need for wheels...
    and the case didn't seem to have what i might term
    non slip handholds either.
    that's where my insurance kicks in.
    good god
  • DanNeely - Tuesday, April 16, 2013 - link

    it would require changing the appearance slightly; but to make installing cards easier I'd suggest putting holes in the frame at the proper screw location and extending the side panel to cover them. It worked well in one of the more plebeian cases I've used.

    I've had trouble with hinged toolless latching mechanisms not being compatible with dual slot GPUs before and am leery about suggesting them for something like this; although with a watercooled card the obstruction might not be an issue.
  • minijedimaster - Tuesday, April 16, 2013 - link

    So they basically just took a Fractal Design XL R2 and modified it, slapped their name on it and called it a day.

    http://www.fractal-design.com/?view=product&ca...
  • santiagoanders - Tuesday, April 16, 2013 - link

    The interior is much more similar to the CoolerMaster Cosmos II
  • JFord047 - Wednesday, April 17, 2013 - link

    Which is basically Just an Antec Performance case re-jigged
  • Sabresiberian - Tuesday, April 16, 2013 - link

    Not sure why someone would question the "need" for this over the 800D. It's pretty simple:

    800D - 7 Expansion slots
    900D - 10 Expansion slots

    The 900D will simply hold a much larger mainboard. The 800D might well be crowding a third graphics card, and a fourth one would be out of the question.
  • Aikouka - Tuesday, April 16, 2013 - link

    I already own an 800D, and it's nice to see that they addressed the cable routing shortcomings in that case. It annoys me that I spent $300 on that case to see the side panel bow out because I'm routing a fairly common number of cables behind the case. While the side panel bowing doesn't really hamper you, I have found another issue with it that makes me reconsider ever buying another Corsair case. The other issue is that the 800D is limited in regard to the radiator sizes that it supports. Why is it that Corsair designed the 800D, their previous flagship case, to only support up to a 240mm radiator? If I had to guess, it's probably because Corsair was only selling a 240mm solution at this point (their H100 all-in-one). However, a few months ago, Corsair released a 280mm all-in-one solution called the H110i, which isn't even supported by the 800D!

Log in

Don't have an account? Sign up now