Rosewill Blackhawk Ultra Case Review: Were It Not For Competition
by Dustin Sklavos on March 28, 2013 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- Rosewill
- HPTX
- ATX
- XL-ATX
Testing Methodology
For testing full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
ATX Test Configuration | |
CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
Motherboard | Gigabyte GA-Z77X-UD4H |
Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) 2x NVIDIA GeForce GTX 580 in SLI (full fat testing only) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive 3x HGST DeskStar 3TB 7200-RPM HDD |
CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Plus 1000W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
For the "full fat" testbed, the GTX 560 Ti is swapped out for a pair of GTX 580s, and three hard disks are added to fill out the case.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z77X-UD4H motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- Thank you to HGST for providing us with the trio of hard drives.
- And thank you to SilverStone for providing us with the power supply.
27 Comments
View All Comments
lwatcdr - Friday, March 29, 2013 - link
You see I feel the opposite. I would like to see more cases with just optical drive bays. It is easy enough to put in adaptors for any drive you want. What I really want is an ITX or mATX case with just 4 optical bays. I can get two 2to3 hotswap bays and make a NAS then. I would take six bays as well as then I could use two 3x5 bays and build a 10 drive NAS. In a way I do agree that we need more extreme cases. I would like to see some with no optical bays, some with only optical bays, and some with a mix of bays.lwatcdr - Thursday, March 28, 2013 - link
I do not think that the Blackhawk competes with the Phantom 630 but with the 820, the Switch 810, and other cases that support E-ATX and larger motherboards. The 630 is a great case but is a good bit smaller. If you want to do a build a really complex water cooler loop system, or run a quad SLI system then you need a case like the Blackhawk. The 630 is a great case but not really in the same class as the Blackhawk. The Switch is and frankly maybe the better case for a lot of builds.The one place that Blackhawk and it's twin the Xigmatek Elysium really shine is if you want a dual CPU workstation. They have the cutouts to support dual CPUs. That is also probably why they have such conservative looks. If you are going to build a dual 2011 system with a Quadro card and maybe a Tesla card or two then you really don't want it to look like a transformer. Lots of space and cooling for a really large system for a really low price.
SunLord - Thursday, March 28, 2013 - link
I have this case which I'm setting up to run a water cooled Dual Opteron server. This case is perfect for crazy large water cooled builds. As you can easily run 1 200MM on top, 1 3x140mm on bottom, and 1 140mm radiator on the rear with little trouble. You also can in theory fit in a 2x140MM radiator on the side of the hard drive cage but it's a bit of a pain as the case isn't meant mount one there. You also have the option given all the hose holes to use external radiators.JonnyDough - Friday, March 29, 2013 - link
Honestly, two big fans directing air through filtration from bottom to top is all you really need to properly cool a case. I still think that the modern redesign of the old layout has a long way to go. How these companies situation the goods inside the case could use some re-evaluation.It would be best served towards the front bottom of the case, below the drives for cable routing. The PSU needs to be a source of filtered cool air INTAKE. The out other intake needs to be filtered air through the bottom rear of the case flowing directly into the video card. If you want, an optional third intake can be window mounted with direct ducting to the CPU cooler.
The top of the case needs one giant quiet fan in the middle to expel hot air. Hot air rises, so it will rise to the top naturally and be expelled from the case by the fan. Positive air pressure is not necessary as long as the rest of the case is sealed up and the only intake possible is through the filters.
lwatcdr - Friday, March 29, 2013 - link
I think you underestimate the value of positive case pressure.1. It is pretty impractical to seal a case so it can only intake air from filtered sources. USB ports, side panels, and other ports and connections are almost never air tight.
2. Higher air pressure means that you have denser air which means more mass to carry away the heat. Of course just to make life hard when you compress a fluid like air you heat it. Light positive pressure supplied from filtered intakes.
sulu1977 - Friday, March 29, 2013 - link
What I want to see is a case with a filter so that no dust or insects can get inside. Also most of USB ports should be at bottom of front panel, behind a simple hinged cover.Ammohunt - Thursday, April 4, 2013 - link
I would like to see this case built with every fan position filled.