Fractal Design Core 1000: How Little is Too Little
by Dustin Sklavos on April 13, 2012 11:35 AM EST- Posted in
- Cases/Cooling/PSUs
- MicroATX
- Mini-Tower
- Fractal Design
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
ATX Test Configuration | |
CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
Accessories | Corsair Link |
CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
53 Comments
View All Comments
GPCustomPC - Wednesday, April 25, 2012 - link
Never mind, I see now that the heat pipes were hitting the side of the case. I'll be sure to use a smaller cooler such as the CM Hyper TX3 if a customer requests an aftermarket cooler while using this case.DualCaesar - Tuesday, December 3, 2013 - link
I bought it and it has a netting covering the front, I'm not sure if I should remove it or not.
Xoslicer 32 - Thursday, June 11, 2015 - link
in what order do i connect the led lights and power button etc...Thanks!