The NZXT C650 650W PSU Review: Designed To Last
by E. Fylladitakis on August 11, 2020 8:00 AM EST- Posted in
- Cases/Cooling/PSUs
- PSUs
- 80Plus Gold
- NZXT
- 650W
- Modular
Hot Test Results
As we can see in the following tables, the NZXT C650 delivers great power quality. The maximum voltage ripple on the 12V line is 28 mV, an unimpressive figure nowadays, but less than a quarter of the ATX design guide's recommended 120 mV limit. Ripple on the secondary 3.3V/5V lines is considerably worse, reaching 28 mV on the 5V line with a recommended maximum at 50 mV. We can notice the same pattern on voltage regulation, with the 12V line very tightly regulated at 0.7% and the regulation on the secondary 3.3V/5V lines reaching slightly over 2%.
| Main Output | ||||||||
| Load (Watts) | 130.6 W | 326.19 W | 486.33 W | 647.57 W | ||||
| Load (Percent) | 20.09% | 50.18% | 74.82% | 99.63% | ||||
| Amperes | Volts | Amperes | Volts | Amperes | Volts | Amperes | Volts | |
| 3.3 V | 1.78 | 3.33 | 4.45 | 3.33 | 6.67 | 3.29 | 8.89 | 3.27 |
| 5 V | 1.78 | 5.05 | 4.45 | 5.01 | 6.67 | 5 | 8.89 | 4.97 |
| 12 V | 9.6 | 12.05 | 24.01 | 12.04 | 36.01 | 11.97 | 48.02 | 11.96 |
| Line | Regulation (20% to 100% load) |
Voltage Ripple (mV) | |||||
| 20% Load | 50% Load | 75% Load | 100% Load | CL1 12V |
CL2 3.3V + 5V |
||
| 3.3V | 2% | 10 | 16 | 20 | 22 | 12 | 24 |
| 5V | 1.6% | 12 | 16 | 22 | 28 | 14 | 24 |
| 12V | 0.7% | 16 | 20 | 22 | 28 | 30 | 20 |
Operation in high ambient temperatures does not affect the performance of the NZXT C650 considerably, regardless of the load. The average nominal load range (20%-100%) efficiency drops by 0.8% regardless of the input voltage, going down to an average of 89.8% (230 VAC) / 88.1% (115 VAC). There is very little change across the entire load range, suggesting that the components of the PSU are practically unaffected by the high ambient temperature. The component temperatures are high but not overly so.
As expected, the thermal control circuitry of the NZXT C650 correctly detects the high ambient temperature inside our hotbox and adjusts the fan’s speed accordingly. The NZXT C650 is not silent under these operating conditions, with the fan’s speed gradually increasing along with the load. Nevertheless, the sound pressure level tops out at just 50.2 dB(A), a figure significantly lower than what we would expect from a unit with a powerful 120 mm fan.
Facebook
Twitter
RSS
34 Comments
View All Comments
qlum - Tuesday, August 11, 2020 - link
While they generally do have the extra 4 pin, actually plugging it in is completely optional unlike the extra connector on gpu's. In terms of power requirements it's also completely unnecessary to use it. The extra 4 pin is mostly the motherboard manufacturer showing look at our beefy vrm rather then actual need.MrVibrato - Tuesday, August 11, 2020 - link
No. Your AM4 CPU doesn't require 8+4. It's called gamer street cred.Wait...
Is it even possible for gamers to have street creds?
MrVibrato - Tuesday, August 11, 2020 - link
Darn... wrong reply button... was supposed to be a reply to Amoro's post...eek2121 - Tuesday, August 11, 2020 - link
I wouldn’t say most. The more affordable boards do not. My board has a single 8 pin. Anything above and beyond that is a gimmick.ArmedandDangerous - Tuesday, August 11, 2020 - link
You only need the 1 8 pin. Anything extra is for much more exotic overclocking the majority of people will never need.PenGunn - Tuesday, August 11, 2020 - link
As always, just get the Seasonic that fits your purpose.eek2121 - Tuesday, August 11, 2020 - link
I accidentally bought a Seasonic PSU thanks to Amazon’s infuriating inability to do a proper search. Still trying to decide whether to keep it or return it.evilspoons - Tuesday, August 11, 2020 - link
Small nitpick on the "Main Output" table on the Hot Test Results page. At 20% you read 5.05 V, at 50% you read 5.01 V, and at 100% you read 4.97 V. All two decimals of precision. However, at 75% load it's just listed as "5 V". Shouldn't that be "5.00"?fred666 - Tuesday, August 11, 2020 - link
What's the point of being 100% modular? Is someone really going to use this without the main ATX motherboard connection?It looks nice in the box, but I don't see any real-world advantage.
eek2121 - Tuesday, August 11, 2020 - link
The cables can easily be replaced. For example, cablemod allows you to purchase custom length cables. Also, what if a connector or cable breaks?