TEKQ Rapide Thunderbolt 3 External SSD Review
by Ganesh T S on February 20, 2018 8:00 AM EST- Posted in
- Storage
- SSDs
- DAS
- Thunderbolt 3
Flash-based external direct-attached storage (DAS) devices have evolved rapidly over the last few years. Starting with simple thumb drives that could barely saturate USB 2.0 bandwidth, we now have high-performance external SSDs that take advantage of the USB 3.1 Gen 2 interface to saturate the internal SATA bandwidth. The introduction of PCIe-based SSDs have enabled mass-market storage devices to break the SATA barrier. The proliferation of Thunderbolt 3 (that drives up the available bandwidth by a factor of four compared to USB 3.1 Gen 2) has ensured that the full performance benefits of the internal PCIe interface can be made available in external devices.
A number of high-performance direct-attached storage (DAS) devices have attempted to take advantage of the benefits of Thunderbolt in the last few years. However, they have either required external power adapters (such as the LaCie d2 Thunderbolt 2 SSD Upgrade), or, in the case of bus-powered devices, been held back by an internal SATA SSD (eg.: LaCie Rugged Thunderbolt). The pricing of such devices have also restricted them to the high-end / professional market. In this context, the introduction of a reference platform by Phison at CES 2018 is sure to address the shortcomings of the current external Thunderbolt SSDs in the mainstream market.
Introduction
TEKQ has been in business as a manufacturer of Apple MFI-certified peripherals for some time now. They are new to the direct-attached storage space, but, their first product in that market segment - the Rapide Thunderbolt 3 External SSD - leapfrogs most of the other bus-powered alternatives in the market in terms of both performance and pricing.
The TEKQ Rapide is a 98mm x 45mm x 12mm silver-colored external SSD with an aluminum chassis. It sports a single Thunderbolt 3 interface for both power and data. The port is enabled by the Intel DSL6340 Thunderbolt 3 Controller - note that this belongs to the Alpine Ridge family, and hence, works only with Thunderbolt 3 Type-C ports. On the other side of the DSL6340 is a PCIe 3.0 x4 connection that leads to a M.2 slot capable of accommodating M.2 2260 or 2280 PCIe SSDs. There are no plastic components in the chassis.
There is nothing preventing advanced users from installing their own M.2 PCIe SSDs in the internal M.2 slot. However, TEKQ plans to sell the Rapide in three different capacity points - 240GB, 480GB, and 960GB. Based on our teardown, the internal SSD doesn't seem to be a branded one. Instead, it appears to be a Phison reference design using the E7 controller along with Toshiba's MLC NAND flash.
Unlike similar products such as OWC Envoy Pro EX / EX(VE) that are available for retail purchase right now, TEKQ has opted to go for the crowdfunding route to garner more exposure prior to a wide market release. As a matter of policy, AnandTech does not cover crowdfunding projects. There are very few exceptions - most of the ones that pass our bar are ones where the product is close enough to the launch that manufacturers are ready to have us post a hands-on review of the product. The TEKQ Rapide is one such device. TEKQ's crowdfunding initiative will go live on Feb. 21, 2018.
TEKQ sent over the 240GB variant for review. In addition to the main unit, a 0.5m Thunderbolt 3 cable (certified for 40 Gbps operation) is also bundled.
The TEKQ Rapide is around the size of a credit card, and weighs 135g. With TEKQ's own internal SSD solution, read/write speeds of 2700 MBps / 1500 MBps are claimed, with the random read/write IOPS coming in at 300K/250K respectively.
Prior to looking at the internals, CrystalDiskInfo provides some insights.
Even though CrystalDiskInfo puts only SMART in the features section, we will see later on that TRIM is also supported. The Thunderbolt link is essentially invisible to the tool, with NVM Express listed as the interface. For all practical purposes, the TEKQ Rapide SSD is a PCIe 3.0 x4 NVMe SSD in the system.
Internal Hardware
The TEKQ Rapide is easy to disassemble, with four screws hidden under the rubber feet on the underside of the chassis. The gallery below has pictures of the chassis as well as the internal design and M.2 SSD. The Phison controller and the Toshiba MLC flash are easily seen in the M.2 SSD.
The design includes thermal pads for both the M.2 SSD and the Thunderbolt 3 controller. As we shall see later on, the thermal solution is very effective in keeping the internal temperatures under check even under stressful conditions beyond what a consumer-focused DAS unit might endure.
Usage Impressions
The TEKQ Rapide is plug-and-play except for the small matter of allowing Thunderbolt security to allow one's system to act as a host for the device.
Once approved (needs to be done only once per system if the 'Always Connect' option is chosen), the device mounts as a exFAT volume. This allows for compatibility with both Mac and Windows devices. Since the Thunderbolt 3 / NVMe SSD breezed through our benchmarks in very little time, we were able to evaluate the unit with the volume formatted in exFAT and NTFS.
Unlike some of the other portable SSDs in the market that come with value-adds such as hardware encryption support, the TEKQ is currently keeping it simple. Despite the underlying platform (Phison E7 reference design with Toshiba 15nm MLC flash) supporting AES-256 with TCG / Opal 2.0, the feature doesn't have any user-friendly way to get activated.
33 Comments
View All Comments
repoman27 - Tuesday, February 20, 2018 - link
“The only current alternative to the TEKQ Rapide in its price range is the OWC Envoy Pro EX / EX(VE).”What about the Sonnet Fusion Thunderbolt 3? Only available in 1TB, but pretty comparable.
ganeshts - Tuesday, February 20, 2018 - link
Yes, I am aware of the Sonnet Fusion. However, it is definitely not a mainstream market product (as you can guess from the only available capacity point). I would say $300 is the sweet-spot for a high-end portable SSD that still caters to the mainstream market.Vidmo - Wednesday, February 21, 2018 - link
You can just ignore this Thunderbolt device in you use Windows Server, Intel does not allow Thunderbolt support on Windows Server: https://communities.intel.com/thread/113299timbotim - Thursday, February 22, 2018 - link
It would be really nice if there was a commercially available box for using NVMe SSDs (preferably in pairs) externally over PCIe 'cable', along with a PCIe adapter such that you could connect internal PCIe to an expansion slot bracket for the aforementioned PCIe 'cable'. I've had to create a piece of home-brew kit to do this but it's not pretty. All the pieces of the technology are COTS, I'm surprised someone like Startech hasn't done this.jabber - Thursday, February 22, 2018 - link
So...e-NVMe basically?jabber - Thursday, February 22, 2018 - link
If such a thing existed that is. We ended up with e-SATA so I guess other options will come along in time.GPUnut - Thursday, February 22, 2018 - link
Your 6 minute Thermal Test was interesting. I ran a 10 minute cycling sequential read/write using AJA System Test (16G test size, 4K frame size). The write speed of the Rapide dropped from 1200MB/s to 300MB/s at the 6 minute mark and never recovered. The Sonnet Fusion TB3 maintained a steady 1100MB/s during the full 10 minute test.ganeshts - Friday, February 23, 2018 - link
Interesting - but, have you considered that in 10 minutes - you have probably written more than the capacity of the drive itself ? The 6 minute test that I did accesses around 240 GB of data - equivalent to the capacity of the drive - anything more than that is not realistic.Btw, the drop in the write speed is probably not due to thermals, but, the nature of the Phison SSD itself. I am willing to bet that if we use the same SSD inside as the Sonnet Fusion, the perf will be similar.
GPUnut - Saturday, February 24, 2018 - link
I was testing the 512G version. You are correct about the Phison. I replaced it with a 512G Samsung SM951. No drop in write speed during 10m test.s.yu - Sunday, March 4, 2018 - link
I wonder where I'd get a single slot 3.5" enclosure with support for up to at least 12TB, right now it's hard to expand the storage of my laptop setup as my old case only supports 4TB.