Visual Inspection

The appearance of the latest TUF board from ASUS looks a lot different than its X99 based predecessor. The X299 dials back on the military-theme, with the armor covering a bit more of the Sabertooth. The armor around the back panel IO, PCIe area, and VRM shroud are mostly grey this generation, with black accent pieces covering the audio portion as well as covering the upper right-hand corner of the board. The back of the board also has armor for protection and rigidity purposes. The top part of the backplate is used to help cool the VRM it sits under with a thermal pad between the board and metal backplate. The DRAM slots alternate black and grey matching the shrouds and overall theme. The PCH and M.2 slot are actively cooled by a small fan underneath the PCIe shroud which routes the air over the PCH heatsink, down to the M.2 heatsink and out the bottom. RGB LEDs will have to come from the user using the single onboard header as the TUF X299 Mark 1 does not have any for looks. There are the Q-LED lights in the top right corner, and that is it. 


If there is one thing this board has a lot of that would be fan and pump headers. There are a total of 10, in fact. Up top above the left set of DRAM slots are four headers, CPU Fan, CPU OPT, CHA Fan3 and the ASST Fan header. Down the right side of the board are four more headers, CHA Fan 1/4/5 and the W PUMP+ header. On the bottom are the last two, CHA Fan 2, and H AMP Fan. All headers will support both 3-pin DC and 4-pin PWM devices for added flexibility in fan choice. Asus recommends the use of PWM fans on the H AMP Fan header on the bottom or to disable Q-Fan if using a 3-pin device.

The VRM section is 8-phase and controlled buy ASUS's own Digi+ VRM control chip (ASP1405I). Both the chokes and 10K Black Metallic Capacitors are certified military-grade for increased durability. The MOSFETs are Infineon OptiMOS 5 BSG0812ND and also considered military-grade. Power is fed to the VRM by an 8-pin EPS connector as well as an optional 4-pin next to it. In this picture, we also get a closeup of the four Fan headers in the top left-hand part of the picture.

The eight DRAM slots on the TUF X299 Mark 1 use a one latch system to keep the sticks in place. Surprisingly, the slots are not reinforced, although ASUS hasn't really focused on that 'feature' like other companies have. Certainly, that feature isn't needed but figured it would have been there since the board sits in the durable and reliable category. Memory capacity is 128GB with supported speeds up to DDR4-4133 for both quad channel (Skylake-X) and dual channel (KabyLake X) CPUs.

The right side of the board, starting from the top-right corner, is where the Q-LED lights are found. There are five lights in total. CPU, DRAM, VGA, and BOOT lights round out the active LEDs. These lights are useful during the POST process for troubleshooting as it gives users an idea of where to look for issues if the system isn't booting properly. Also located here is the MEMOK! button which will automatically tune the memory for compatibility and allow for a successful boot if memory is the culprit. The PWR LED lights up to indicate the system is ON, in sleep mode, or in soft-off mode. 

The right side is where to find the 24-pin ATX power connector, three chassis fan headers, the front panel USB 3.1 10 Gbps port, a front panel USB 3.0 port, and the eight SATA connections. 

The eight chipset connected SATA ports are in a standard configuration with all ports next to each other and oriented horizontally. Ports 5, 6, 7, and 8 share bandwidth with the second (bottom) PCIe x4 slot.

The bottom of the board with the shroud off shows the ASUS specific ALC1220S codec and Nichicon capacitors. Just to the right of it are three temperature sensor headers (via thermistors) above the front panel audio header. As we keep moving to the right there is a power button, Thunderbolt header, RGB LED, Chassis Fans, USB 2.0 header, the vertical M.2 slot and front panel headers.

In the PCIe segment of the board, as shown below, there are three full-length PCIe slots and two open-ended x4 slots. Two of three full-length slots are reinforced with a fortifying metal (ASUS calls this Safeslot) to support heavy video cards. The x4 slots are tied to the PCH while the three full-length slots are CPU connected. Also pictured here is the heatsink for the M.2 device to the right of the lower x4 slot.

Below is a simplified list of how the PCIe slots will work with each family of CPUs (talking PCIe lanes) when multiple cards are used (the "@" symbol is used to show slot preference for the configuration): 

ASUS TUF X299 Mark 1 CPU PCIe Layout
PCIe 1 @x16 x16 @x16 x16 @x16 x8
PCIe 3 @x16 x16 @x8 x8 - x8
PCIe 5 x8 x8 x4 x4 - -
SLI Yes Yes Yes No - Yes
Crossfire Yes Yes Yes Yes Yes Yes

On the back IO panel we get a USB BIOS Flashback button and a stack of four USB 2.0 ports to start. This is followed by the TUF Detective USB port (for the BlueTooth unit for debugging), and USB 3.1 (10 Gbps) Type-A (Teal) and Type-C ports. Two network jacks on top of four (total) USB 3.0 ports and a 5-jack audio stack with SPDIF out round out the connectivity here. 

In The Box

We get the following (some not pictured):

  • Vertical M.2 bracket
  • 4 x SATA cables
  • ASUS 2-Way and 3-Way SLI bridge
  • M.2 screw package
  • Support DVD / Users Guide / Cert. of Reliability
  • 2-Way SLI HB bridge
  • Q-Connector
  • TUF stickers
  • TUF dongle
  • 3 x PCIe x16 slot dust covers
  • 1 x PCIe x4 slot dust cover
  • TUF VGA holder

ASUS TUF X299 Mark I Overview BIOS and Software
Comments Locked


View All Comments

  • Sn3akr - Thursday, December 7, 2017 - link

    Are there ever gonna be a motherboard with clean lines and less appeal to 13-year old kids? 99.99% of the manufacturers all do black/red/gray colour, jagged edges and a missmash of edgy design feeatures. Guess i'll have to invest in a lazercutter to get clean lines and smooth design before i grow old and die. CLosest thing i've ever seen was ASUS Z97 SaberTooth Mark S, but then they went back to the teen tech.

    You can get some really nice cases, but if you try to match the hardware in one color other than black/red or black grey, then your in for a modding session. Currently making a white/purple build, but for some bizarre reason asus thinks all their "white boards" just needs a few blue details, and for the higher end cards.. then black/red or black/grey seems to be almost the only option, and has been for almost 10 years
  • sonny73n - Thursday, December 7, 2017 - link

    It's just Asus with their dumb marketing gimmicks again. IMO their boards are the best but they're the worst values for the money. I'd go with ASRock instead.
  • xray9 - Sunday, December 10, 2017 - link

    Look to Supermicro server and workstation boards.
    I invested 3y ago into an X10SRi-F with E5-1650v3 or v4 .. works like a charm.
    And even today it scales very nicely
    - it has many PCIe 3.0 sockets with reasonable amount of PCIe lanes and some PCIe2.0
    - if you compare the ratio of passmark performance divided by price, then you will see, that it the ratio is about the same compared to threadripper and Intel CPUs .. Which means you do not pay €1000 for threadripper which is quite expensive, you pay around €600 but get the same performance / price ratio
    - you have with socket 2011-3 quad memory speed and ECC if you compare with Intel ...
    - IPMI ...
    Completely true enterprise segment products to a reasonable price.
    So even 3y later absolutely compareable and expandable by PCI sockets with USB 3.1, further USB 3.0 or 10 Gigabit adapters if you require, PCIe based NVME ... all is possible.
  • super gaming - Thursday, December 14, 2017 - link

    mother board asus tuf x2 does have amazing performance

    <a href="
    lenovo super gaming laptop with cheap price</a>
  • tompreston301 - Monday, January 1, 2018 - link

    thanks so much for the articles. I really like it. This is really awesome for those who want something awesome and good as you know.

Log in

Don't have an account? Sign up now